2LPY AND T8 AND 9 Part by Daniels Manufacturing Corporation with NSN 5320-00-702-3259 - Request a Quote Now

Part Number: 2LPY AND T8 AND 9

Manufacturer: daniels manufacturing corporation

NSN: 5320-00-702-3259

CAGE Code: 11851

NIIN: 007023259

Item Name : pin rivet

INC Code: 67165

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

FSC: 5320 Rivets

For competitive procurement options on part number 2LPY AND T8 AND 9 from Daniels Manufacturing Corporation (CAGE Code 11851), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 2LPY AND T8 AND 9 Details:

Part number 2LPY AND T8 AND 9 is manufactured by Daniels Manufacturing Corporation and listed with the item name Pin Rivet. Classified under NSN 5320-00-702-3259, the NIIN of this item is 007023259, its INC is 67165, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5320 Rivets. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 2LPY And T8 And 9

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 2LPY AND T8 AND 9 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 2LPY And T8 And 9 with NSN 5320-00-702-3259, 5320007023259

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5320-00-702-3259 Item PartTypeName: PIN-RIVET	5320	007023259	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
1468-09	2	9	5

Characteristics Data of NSN 5320-00-702-3259, 5320007023259

MRC	Criteria	Characteristic
AASB	FASTENER LENGTH	2.750 INCHES MINIMUM AND 2.950 INCHES MAXIMUM
AASU	HEAD HEIGHT	0.128 INCHES MINIMUM AND 0.147 INCHES MAXIMUM
AAZG	HEAD MAJOR DIAMETER	0.390 INCHES MINIMUM AND 0.430 INCHES MAXIMUM
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
AAZE	SHANK DIAMETER	0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
AAZF	SHANK STYLE	PIN-RIVET,MULTIPLE GROOVED
ANEE	GRIP LENGTH	0.532 INCHES MINIMUM AND 0.594 INCHES MAXIMUM
CQBC	MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
MATT	MATERIAL	STEEL OVERALL
SFTT	SURFACE TREATMENT	CADMIUM OVERALL