D7171A Part by Dayton Walther Corp with NSN 5340-00-161-1207 - Request a Quote Now

Part Number: D7171A

Manufacturer: dayton walther corp

NSN: 5340-00-161-1207

CAGE Code: 72540

NIIN: 001611207

Item Name : clamp synchro

INC Code: 40268

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

FSC: 5340 Hardware Commercial

For competitive procurement options on part number D7171A from Dayton Walther Corp (CAGE Code 72540), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number D7171A Details:

Part number D7171A is manufactured by Dayton Walther Corp and listed with the item name Clamp Synchro. Classified under NSN 5340-00-161-1207, the NIIN of this item is 001611207, its INC is 40268, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5340 Hardware Commercial. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for D7171A

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part D7171A with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number D7171A with NSN 5340-00-161-1207, 5340001611207

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-00-161-1207 Item PartTypeName: CLAMP,SYNCHRO	5340	001611207	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
8-8-18	2	9	5

Characteristics Data of NSN 5340-00-161-1207, 5340001611207

MRC	Criteria	Characteristic
ABFF	FURNISHED ITEMS	LOCKNUT
ABGL	WIDTH	2.562 INCHES NOMINAL
ABRY	LENGTH	2.812 INCHES NOMINAL
FEAT	SPECIAL FEATURES	0.812 IN. BY 1.340 IN. MOUNTING HOLE
HGTH	HEIGHT	1.938 INCHES NOMINAL
MATT	MATERIAL	IRON
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-I-11444,CLASS 1 OR 2 MIL SPEC SINGLE MATERIAL RESPONSE
SFTT	SURFACE TREATMENT	CADMIUM
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 1,CLASS 1 FED SPEC SINGLE TREATMENT RESPONSE