46-202 Part by Delta Intl Machinery Corp with NSN 3220-01-212-4343 - Request a Quote Now

Part Number: 46-202

Manufacturer: delta intl machinery corp

NSN: 3220-01-212-4343

CAGE Code: 83738

NIIN: 012124343

Item Name : lathe woodworking

INC Code: 07250

Country: USA

NCB Code: 01

FSG: 32 Woodworking Machinery and Equipment

FSC: 3220 Woodworking Machines

For competitive procurement options on part number 46-202 from Delta Intl Machinery Corp (CAGE Code 83738), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 46-202 Details:

Part number 46-202 is manufactured by Delta Intl Machinery Corp and listed with the item name Lathe Woodworking. Classified under NSN 3220-01-212-4343, the NIIN of this item is 012124343, its INC is 07250, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 32 Woodworking Machinery and Equipment and Class (FSC) 3220 Woodworking Machines. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 46-202

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 46-202 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 46-202 with NSN 3220-01-212-4343, 3220012124343

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3220-01-212-4343 Item PartTypeName: LATHE,WOODWORKING	3220	012124343	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
46-201	5	9	5

Characteristics Data of NSN 3220-01-212-4343, 3220012124343

MRC	Criteria	Characteristic
AAXX	MOUNTING TYPE	FLOOR
ACDC	CURRENT TYPE	AC
ASHK	ELECTRIC MOTOR HORSEPOWER RATING	0.750
ATJK	POWER SOURCE	ELECTRIC MOTOR
AWHA	BED TYPE	SLIDING GAP
BTTB	SPINDLE SPEED RANGE IN RPM	915.0 TO 3260.0
BTZN	RATED SWING OVER GAP	16.000 INCHES MINIMUM
BTZP	RATED SWING OVER BED	12.000 INCHES MINIMUM
FAAZ	PHASE	THREE
FEAT	SPECIAL FEATURES	W/O CABINET; 4 SPEED
FREQ	FREQUENCY IN HERTZ	60.0