QMG10 Part by Digitac with NSN 6625-00-922-9310 - Request a Quote Now

Part Number: QMG10

Manufacturer: digitac

NSN: 6625-00-922-9310

CAGE Code: 04296

NIIN: 009229310

Item Name : test set teletypewriter

INC Code: 03682

Country: USA

NCB Code: 00

FSG: 66 Instruments and Laboratory Equipment

FSC: 6625 Electrical And Electronic Properties Measuring And Testing Instruments

For competitive procurement options on part number QMG10 from Digitac (CAGE Code 04296), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number QMG10 Details:

Part number QMG10 is manufactured by Digitac and listed with the item name Test Set Teletypewriter. Classified under NSN 6625-00-922-9310, the NIIN of this item is 009229310, its INC is 03682, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 66 Instruments and Laboratory Equipment and Class (FSC) 6625 Electrical And Electronic Properties Measuring And Testing Instruments. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for QMG10

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part QMG10 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 6625-00-922-9310, 6625009229310

MRC	Criteria	Characteristic
ACYN	Ac Voltage Rating	105.0 VOLTS MINIMUM AND 125.0 VOLTS MAXIMUM
AEAS	Major Components	ANALYZER, TELETYPEWRITER SIGNALS, GENERATOR TEST MESSAGE, CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAL
FAAZ	Phase	SINGLE
ANPZ	Inclosure Feature	MULTIPLE ITEM W/HOUSING
AKWC	Electrical Power Source Relationship	OPERATING
AQXY	Test Type For Which Designed	SIGNAL DISTORTION DIFFERENTIAL DELAY RATE, BIT ERROR RATE DETERMINATION, DISTORATION MONITORING
ACZB	Frequency Rating	60.0 HERTZ NOMINAL
MRC	Decoded Requirement	Clear Text Reply
ALSF	Internal Battery Accommodation	NOT INCLUDED