12266756 Part by Drs Network And Imaging Systems Llc with NSN 6650-01-082-8962 - Request a Quote Now

Part Number: 12266756

Manufacturer: drs network and imaging systems llc

NSN: 6650-01-082-8962

CAGE Code: 32865

NIIN: 010828962

Item Name : spacer optical element

INC Code: 22261

Country: USA

NCB Code: 01

FSG: 66 Instruments and Laboratory Equipment

FSC: 6650 Optical Instruments Test Equipment Components And Accessories

For competitive procurement options on part number 12266756 from Drs Network And Imaging Systems Llc (CAGE Code 32865), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 12266756 Details:

Part number 12266756 is manufactured by Drs Network And Imaging Systems Llc and listed with the item name Spacer Optical Element. Classified under NSN 6650-01-082-8962, the NIIN of this item is 010828962, its INC is 22261, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 66 Instruments and Laboratory Equipment and Class (FSC) 6650 Optical Instruments Test Equipment Components And Accessories. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 12266756

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 12266756 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 6650-01-082-8962, 6650010828962

MRC	Criteria	Characteristic
AGFF	Flange Width	0.100 INCHES NOMINAL
ANAM	Taper Bore Minor Diameter	2.140 INCHES MAXIMUM
SFTT	Surface Treatment	ANODIZE
MDCL	Material Document And Classification	QQ-A-225/8,T651 FED SPEC SINGLE MATERIAL RESPONSE
FEAT	Special Features	SPACER-NO. 4,EYEPIECE; BLACK; 4 SLOTS 0.060 IN. WIDE BY 0.050 IN. DEEP; EACH END CONTAINS 2 EQUALLY SPACED SLOTS; 45 DEG BETWEEN THE OPPOSITE END SLOTS; ESTABLISH LENGTH BY MEASURING SEPARATION BETWEEN REFERENCE SPHERE 1.275 IN. RADIUS AND SURFACE B (REFERENCE RADIUS LOCATED 0.065 IN. FROM EDGE B)
AGAV	End Item Identification	M901
STDC	Surface Treatment Document And Classification	MIL-A-8625,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE
ABPM	Body Diameter	2.747 INCHES MINIMUM AND 2.748 INCHES MAXIMUM
MRC	Decoded Requirement	Clear Text Reply
MATT	Material	ALUMINUM ALLOY 6061
ABHP	Overall Length	0.517 INCHES NOMINAL
CSKC	Taper Angle	30.0 DEGREES NOMINAL