AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number 283HA-08 from Dynacon Inc (CAGE Code 0FSD0), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number 283HA-08 Details:
Part number 283HA-08 is manufactured by Dynacon Inc and listed with the item name Hose Assembly Nonmetallic. Classified under NSN 4720-01-390-8096, the NIIN of this item is 013908096, its INC is 20311, and its NCB code is 01 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 47 Pipe Tubing Hose and Fittings and Class (FSC) 4720 Hose and Tubing Flexible. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-390-8096 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 013908096 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 12HT6BW12FH12FJ-29.000 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAJD | THREAD CLASS | 2B 1ST END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END" |
| AARX | INSIDE DIAMETER | 0.750 INCHES NOMINAL" |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 1.325 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 9.500 INCHES" |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END" |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END" |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END" |
| CQBD | BURST TEST PRESSURE | 24000.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE" |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED STEEL WIRE" |
| CQCS | LAYER COMPOSITION AND LOCATION | 3RD LAYER BRAIDED STEEL WIRE" |
| CQCS | LAYER COMPOSITION AND LOCATION | 4TH LAYER BRAIDED STEEL WIRE" |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, SYNTHETIC" |
| CQGM | MAXIMUM OPERATING PRESSURE | 6000.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 1.062 INCHES 1ST END" |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END" |
| CRDW | HYDROSTATIC TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 29.000 INCHES NOMINAL OVERALL" |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC" |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE" |
| THSD | THREAD SERIES DESIGNATOR | UN 1ST END" |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAJD | THREAD CLASS | 2B 1ST END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END" |
| AARX | INSIDE DIAMETER | 0.750 INCHES NOMINAL" |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 1.325 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 9.500 INCHES" |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END" |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END" |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END" |
| CQBD | BURST TEST PRESSURE | 24000.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE" |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED STEEL WIRE" |
| CQCS | LAYER COMPOSITION AND LOCATION | 3RD LAYER BRAIDED STEEL WIRE" |
| CQCS | LAYER COMPOSITION AND LOCATION | 4TH LAYER BRAIDED STEEL WIRE" |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, SYNTHETIC" |
| CQGM | MAXIMUM OPERATING PRESSURE | 6000.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 1.062 INCHES 1ST END" |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END" |
| CRDW | HYDROSTATIC TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 29.000 INCHES NOMINAL OVERALL" |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC" |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE" |
| THSD | THREAD SERIES DESIGNATOR | UN 1ST END" |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
