W703290-1 Part by Eaton Aeroquip Inc with NSN 4720-00-515-0314 - Request a Quote Now

Part Number: W703290-1

Manufacturer: eaton aeroquip inc

NSN: 4720-00-515-0314

CAGE Code: 1P322

NIIN: 005150314

Item Name : hose assembly nonmetallic

INC Code: 20311

Country: USA

NCB Code: 00

FSG: 47 Pipe Tubing Hose and Fittings

FSC: 4720 Hose and Tubing Flexible

For competitive procurement options on part number W703290-1 from Eaton Aeroquip Inc (CAGE Code 1P322), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number W703290-1 Details:

Part number W703290-1 is manufactured by Eaton Aeroquip Inc and listed with the item name Hose Assembly Nonmetallic. Classified under NSN 4720-00-515-0314, the NIIN of this item is 005150314, its INC is 20311, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 47 Pipe Tubing Hose and Fittings and Class (FSC) 4720 Hose and Tubing Flexible. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for W703290-1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part W703290-1 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number W703290-1 with NSN 4720-00-515-0314, 4720005150314

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
4720-00-515-0314 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC	4720	005150314	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
3130-517	C	9	5

Characteristics Data of NSN 4720-00-515-0314, 4720005150314

MRC	Criteria	Characteristic
NONMETALLIC	AAGR	CROSS-SECTIONAL SHAPE STYLEROUND
NONMETALLIC	AARX	INSIDE DIAMETER0 937 INCHES NOMINAL
NONMETALLIC	ABJH	TEMP RATING-65 0 DEG FAHRENHEIT AND 350 0 DEG FAHRENHEIT SINGLE RESPONSE
NONMETALLIC	ABKU	FLANGE THICKNESS0 297 INCHES NOMINAL 1ST END
NONMETALLIC	ABKV	OUTSIDE DIAMETER1 312 INCHES NOMINAL
NONMETALLIC	ACKH	MINIMUM INSIDE BENDING RADIUS5 000 INCHES
NONMETALLIC	ADKX	ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG233 0
NONMETALLIC	ADUY	CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1 312 INCHES NOMINAL 2ND END
NONMETALLIC	ADUZ	CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1 312 INCHES NOMINAL 2ND END
NONMETALLIC	AECS	BOLT HOLE QUANTITY4 1ST END
NONMETALLIC	AFQN	FLANGE LENGTH1 750 INCHES NOMINAL 2ND END
NONMETALLIC	AGFF	FLANGE WIDTH1 750 INCHES NOMINAL 2ND END
NONMETALLIC	AHNC	CONNECTION STYLERAISED SWIVEL 1ST END
NONMETALLIC	AHNX	BOLT HOLE DIAMETER0 266 INCHES MINIMUM AND 0 276 INCHES MAXIMUM 1ST END
NONMETALLIC	AJED	RAISED FACE HEIGHT0 015 INCHES NOMINAL 1ST END
NONMETALLIC	AJEE	RAISED FACE DIAMETER1 510 INCHES NOMINAL 2ND END
NONMETALLIC	AKUT	END FLANGE CONSTRUCTIONSOLID 1ST END
NONMETALLIC	AKUU	END CONNECTION DESIGNELBOW 1ST END
NONMETALLIC	AWLS	CONNECTION TYPERAISED FACE FLANGE 1ST END
NONMETALLIC	CQBD	BURST TEST PRESSURE1200 0 POUNDS PER SQUARE INCH
NONMETALLIC	CQCS	LAYER COMPOSITION AND LOCATIONOUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
NONMETALLIC	CQGM	MAXIMUM OPERATING PRESSURE300 0 POUNDS PER SQUARE INCH
NONMETALLIC	CRDW	HYDROSTATIC TEST PRESSURE600 0 POUNDS PER SQUARE INCH
NONMETALLIC	CRFY	FLOW ANGLE90 0 DEGREES 1ST END
NONMETALLIC	CRJM	OUTER COVERING ENVIRONMENTAL PROTECTIONCORROSION RESISTANT
NONMETALLIC	CRWL	INSIDE SURFACE CONDITIONCONVOLUTED
NONMETALLIC	CRXX	MEASURING METHOD AND LENGTH37 750 INCHES MINIMUM WORKING AND 38 250 INCHES MAXIMUM WORKING
NONMETALLIC	CTCJ	FLANGE STYLERECTANGULAR INCLUDES SQUARE 1ST END
NONMETALLIC	SUPP	SUPPLEMENTARY FEATURESTHIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL THE CURRENT APPROVED SOURCE 1P322 HAS INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984 THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984