AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number T666319 6 0162 from Eaton Aeroquip Inc (CAGE Code 00624), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number T666319 6 0162 Details:
Part number T666319 6 0162 is manufactured by Eaton Aeroquip Inc and listed with the item name Hose Assembly Nonmetallic. Classified under NSN 4720-00-957-6680, the NIIN of this item is 009576680, its INC is 20311, and its NCB code is 00 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 47 Pipe Tubing Hose and Fittings and Class (FSC) 4720 Hose and Tubing Flexible. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAJD | THREAD CLASS | 3B 1ST END" |
| AAJD | THREAD CLASS | 3B 2ND END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END" |
| AARX | INSIDE DIAMETER | 0.312 INCHES NOMINAL" |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 0.438 INCHES NOMINAL" |
| AHNC | CONNECTION STYLE | SWIVEL NUT, FLARELESS 1ST END" |
| AHNC | CONNECTION STYLE | SWIVEL NUT, FLARELESS 2ND END" |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 2ND END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END" |
| CQBD | BURST TEST PRESSURE | 9000.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE" |
| CQGM | MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 0.562 INCHES 1ST END" |
| CQJX | NOMINAL THREAD SIZE | 0.562 INCHES 2ND END" |
| CQRB | SEAT ANGLE | 12.0 DEGREES 1ST END" |
| CQRB | SEAT ANGLE | 12.0 DEGREES 2ND END" |
| CRDW | HYDROSTATIC TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH" |
| CRFY | FLOW ANGLE | 90.0 DEGREES 1ST END" |
| CRSM | VACUUM IN TORR | 50.8" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 16.250 INCHES NOMINAL WORKING" |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END" |
| THSD | THREAD SERIES DESIGNATOR | UNF 2ND END" |
| ZZZK | SPECIFICATION/STANDARD DATA | 96906-MS8006G162C GOVERNMENT STANDARD" |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 6 SIZE" |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAJD | THREAD CLASS | 3B 1ST END" |
| AAJD | THREAD CLASS | 3B 2ND END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END" |
| AARX | INSIDE DIAMETER | 0.312 INCHES NOMINAL" |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 0.438 INCHES NOMINAL" |
| AHNC | CONNECTION STYLE | SWIVEL NUT, FLARELESS 1ST END" |
| AHNC | CONNECTION STYLE | SWIVEL NUT, FLARELESS 2ND END" |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 2ND END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END" |
| CQBD | BURST TEST PRESSURE | 9000.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE" |
| CQGM | MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 0.562 INCHES 1ST END" |
| CQJX | NOMINAL THREAD SIZE | 0.562 INCHES 2ND END" |
| CQRB | SEAT ANGLE | 12.0 DEGREES 1ST END" |
| CQRB | SEAT ANGLE | 12.0 DEGREES 2ND END" |
| CRDW | HYDROSTATIC TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH" |
| CRFY | FLOW ANGLE | 90.0 DEGREES 1ST END" |
| CRSM | VACUUM IN TORR | 50.8" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 16.250 INCHES NOMINAL WORKING" |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END" |
| THSD | THREAD SERIES DESIGNATOR | UNF 2ND END" |
| ZZZK | SPECIFICATION/STANDARD DATA | 96906-MS8006G162C GOVERNMENT STANDARD" |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 6 SIZE" |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
