AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number AE5140P0127-265 from Eaton Aeroquip Inc (CAGE Code 00624), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number AE5140P0127-265 Details:
Part number AE5140P0127-265 is manufactured by Eaton Aeroquip Inc and listed with the item name Hose Assembly Nonmetallic. Classified under NSN 4720-01-312-2533, the NIIN of this item is 013122533, its INC is 20311, and its NCB code is 01 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 47 Pipe Tubing Hose and Fittings and Class (FSC) 4720 Hose and Tubing Flexible. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-312-2533 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 013122533 | W | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AE5140P0127-265 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2B 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AARX | INSIDE DIAMETER | 1.375 INCHES NOMINAL |
| ABKU | FLANGE THICKNESS | 0.297 INCHES NOMINAL 2ND END |
| AHNC | CONNECTION STYLE | RAISED SWIVEL 2ND END |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| AHNX | BOLT HOLE DIAMETER | 0.266 INCHES NOMINAL 2ND END |
| AJED | RAISED FACE HEIGHT | 0.062 INCHES NOMINAL 2ND END |
| AJEE | RAISED FACE DIAMETER | 2.135 INCHES NOMINAL 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE 2ND END |
| CQBD | BURST TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE,PARTIAL COVERAGE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CRFY | FLOW ANGLE | 45.0 DEGREES 1ST END |
| FEAT | SPECIAL FEATURES | HIGH STRENGTH HOSE ASSEMBLY |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL,HYDROCARBON SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UN 1ST END |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.812 INCHES NOMINAL 2ND END |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.812 INCHES NOMINAL 2ND END |
| AFQN | FLANGE LENGTH | 2.375 INCHES NOMINAL 2ND END |
| AGFF | FLANGE WIDTH | 2.375 INCHES NOMINAL 2ND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 1.704 INCHES NOMINAL |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 265.0 |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END |
| CQGM | MAXIMUM OPERATING PRESSURE | 250.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 1.875 INCHES 1ST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 800.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CRXX | MEASURING METHOD AND LENGTH | 12.875 INCHES NOMINAL WORKING |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 9.000 INCHES |
| AECS | BOLT HOLE QUANTITY | 4 2ND END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| CTCJ | FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 2ND END |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
