SYNCNUT 116 Part by Eg And G Wakefield Engineering with NSN 5310-01-466-7831 - Request a Quote Now

Part Number: SYNCNUT 116

Manufacturer: eg and g wakefield engineering

NSN: 5310-01-466-7831

CAGE Code: 05820

NIIN: 014667831

Item Name : nut plain cap

INC Code: 01855

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5310 Nuts and Washers

For competitive procurement options on part number SYNCNUT 116 from Eg And G Wakefield Engineering (CAGE Code 05820), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number SYNCNUT 116 Details:

Part number SYNCNUT 116 is manufactured by Eg And G Wakefield Engineering and listed with the item name Nut Plain Cap. Classified under NSN 5310-01-466-7831, the NIIN of this item is 014667831, its INC is 01855, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5310 Nuts and Washers. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for SYNCNUT 116

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part SYNCNUT 116 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number SYNCNUT 116 with NSN 5310-01-466-7831, 5310014667831

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5310-01-466-7831 Item PartTypeName: NUT,PLAIN,CAP	5310	014667831	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
7103782	5	9	D

Characteristics Data of NSN 5310-01-466-7831, 5310014667831

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	2B
AAJF	THREAD DIRECTION	RIGHT-HAND
ACTA	NUT STYLE	CAP
ADEA	NUT HEIGHT	0.325 INCHES MINIMUM AND 0.335 INCHES MAXIMUM
ASDB	WIDTH ACROSS FLATS	0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM
BZRR	THREAD SERIES	UNC
CMLP	THREAD QUANTITY PER INCH	32
CQJX	NOMINAL THREAD SIZE	0.138 INCHES
CRTM	BEARING SURFACE TYPE	FLAT OR CHAMFERED
CTTC	THREAD TOLERANCE CLASS	6H INTERNAL
MATT	MATERIAL	STEEL COMP 1050 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-698 FED SPEC ALL MATERIAL RESPONSES OVERALL