DCR1339 Part by Emhart Industries Inc with NSN 5340-00-848-9634 - Request a Quote Now

Part Number: DCR1339

Manufacturer: emhart industries inc

NSN: 5340-00-848-9634

CAGE Code: 14608

NIIN: 008489634

Item Name : lock set mortise

INC Code: 06701

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

FSC: 5340 Hardware Commercial

For competitive procurement options on part number DCR1339 from Emhart Industries Inc (CAGE Code 14608), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number DCR1339 Details:

Part number DCR1339 is manufactured by Emhart Industries Inc and listed with the item name Lock Set Mortise. Classified under NSN 5340-00-848-9634, the NIIN of this item is 008489634, its INC is 06701, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5340 Hardware Commercial. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for DCR1339

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part DCR1339 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 5340-00-848-9634, 5340008489634

MRC	Criteria	Characteristic
ABGL	WIDTH	1.250 INCHES NOMINAL
ABNM	THICKNESS	1.125 INCHES NOMINAL OVERALL
ABNM	THICKNESS	2.750 INCHES NOMINAL BACKSET
ABNM	THICKNESS	3.750 INCHES NOMINAL CASE
ABRY	LENGTH	7.375 INCHES NOMINAL
APGF	DESIGN TYPE	LATCH BOLT
ASSK	KNOB QUANTITY	2
CBBL	FEATURES PROVIDED	KEY PLATE AND ROSE AND SPINDLE AND STRIKE AND SCREW
CHLZ	LOCKING MECHANISM TYPE	PIN TUMBLER
CHMF	KNOB SHAPE	ROUND
FEAT	SPECIAL FEATURES	CASE THICKNESS:0.750 IN.THK;OUTSIDE SPACING:2.812 IN.
HGTH	HEIGHT	5.000 INCHES NOMINAL
MATT	III MATERIAL	COPPER ALLOY KNOB
MATT	III MATERIAL	IRON CASE
SFTT	SURFACE TREATMENT	ENAMEL BAKED CASE
APHE	OPERATION METHOD	OUTSIDE KEY LATCH BOLT AND KNOB ON OUTSIDE LATCH BOLT AND INSIDE TURN KNOB LATCH BOLT
ASBH	FACE SHAPE	FLAT
BTJY	BOLT TYPE	REVERSE BEVEL
SHPE	SHAPE	RECTANGULAR CASE