1550-10 Part by Esselte Pendaflex Corp with NSN 7490-01-035-5570 - Request a Quote Now

Part Number: 1550-10

Manufacturer: esselte pendaflex corp

NSN: 7490-01-035-5570

CAGE Code: 11244

NIIN: 010355570

Item Name : embossing machine i

INC Code: 27018

Country: USA

NCB Code: 01

For competitive procurement options on part number 1550-10 from Esselte Pendaflex Corp (CAGE Code 11244), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 1550-10 Details:

Part number 1550-10 is manufactured by Esselte Pendaflex Corp and listed with the item name Embossing Machine I. Classified under NSN 7490-01-035-5570, the NIIN of this item is 010355570, its INC is 27018, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) and Class (FSC) . These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 1550-10

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 1550-10 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 7490-01-035-5570, 7490010355570

MRC	Criteria	Characteristic
ALBY	USAGE DESIGN	HORIZONTAL PRINTING
ALDR	TYPE FACE DESIGN	GOTHIC OR MICROGRAMMA
ANMN	KEYBOARD LANGUAGE	ANY ACCEPTABLE
APCB	PORTABILITY	PORTABLE
APHE	III OPERATION METHOD	MANUAL
BCNJ	CHARACTER DESIGN	ALPHABET AND DASH OR SLANT AND NUMERALS 2 TO 9 AND PERIOD
BCZD	CHARACTER QUANTITY	36
BCZR	LINE SPACING CAPABILITY	1 PER INCH
BCZS	TAPE END CUTOFF TYPE	SQUARE
BCZT	HOLE PUNCH	NOT INCLUDED
BCZW	TAPE TYPE FOR WHICH DESIGNED	PLASTIC
BCZX	STRIP WIDTH ACCOMMODATED	0.250 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
BCZY	CHARACTER IMPRESSION DESIGN	ANY ACCEPTABLE
BDBB	CHARACTER HEIGHT	0.180 INCHES
BDBC	CHARACTER READING METHOD	DIRECT
ZZZT	NONDEFINITIVE SPEC/STD DATA	3 TYPE AND 2 CLASS