AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number 34MDCORB from Exide Technologies Gmbh (CAGE Code 20038), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number 34MDCORB Details:
Part number 34MDCORB is manufactured by Exide Technologies Gmbh and listed with the item name Battery Storage. Classified under NSN 6140-01-477-8246, the NIIN of this item is 014778246, its INC is 00013, and its NCB code is 01 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 61 Electric Wire and Power and Distribution Equipment and Class (FSC) 6140 Batteries Rechargeable. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 6140-01-477-8246 Item PartTypeName: BATTERY,STORAGE | 6140 | 014778246 | Y | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 34DC-48 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARA | TERMINAL QUANTITY | 2 |
| AARB | TERMINAL TYPE | THREADED STUD |
| ABHP | OVERALL LENGTH | 10.250 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 8.125 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 6.750 INCHES NOMINAL |
| ADQC | VENTILATION DESIGN TYPE | VENTING ACCOMPLISHED THRU DESIGN |
| ADTC | SEPARATOR MATERIAL | GLASS AND FIBER |
| ADTV | CASE MATERIAL | PLASTIC |
| AGEB | FORDING FEATURE | INCLUDED |
| AQGK | AMPERE HOUR CAPACITY | 50.00 |
| AQGL | TIME CAPACITY IN HOURS | 20.00 |
| AQGQ | CELL QUANTITY | 6 |
| AQGR | PLATE MATERIAL | LEAD |
| AQGS | PLATE QUANTITY PER CELL | 2 |
| AQHD | NONSPILLING FEATURE | INCLUDED |
| AQHF | CHARGE INDICATOR | NOT INCLUDED |
| AQHG | ELECTROLYTE LEVEL INDICATOR | NOT INCLUDED |
| AQHH | STORAGE/SHIPMENT CONDITION | WET CHARGED |
| AQHJ | INTEGRAL CHARGING FACILITY | NOT INCLUDED |
| CWFH | CASE DESIGN TYPE | SEALED |
| ELEC | VOLTAGE IN VOLTS | 12.0 |
| FEAT | SPECIAL FEATURES | 750 COLD CRANK AMPS; WOUND CELL ELEMENT CONSTRUCTION; POLYPROPYLENE CASE/COVER MATERIAL; VITREOUS FIBER SEPERATOR MATERIAL; 1.300 ELECTROLYTE SPECIFIC GRAVITY; SAE SIDE/BOTTOM HOLD DOWN CONFIG.;3/8-16 POS., 5/16-18 NEG. STUD TERMINALS; 13.5 |
| AARA | TERMINAL QUANTITY | 2 |
| AARB | TERMINAL TYPE | THREADED STUD |
| ABHP | OVERALL LENGTH | 10.250 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 8.125 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 6.750 INCHES NOMINAL |
| ADQC | VENTILATION DESIGN TYPE | VENTING ACCOMPLISHED THRU DESIGN |
| ADTC | SEPARATOR MATERIAL | GLASS AND FIBER |
| ADTV | CASE MATERIAL | PLASTIC |
| AGEB | FORDING FEATURE | INCLUDED |
| AQGK | AMPERE HOUR CAPACITY | 50.00 |
| AQGL | TIME CAPACITY IN HOURS | 20.00 |
| AQGQ | CELL QUANTITY | 6 |
| AQGR | PLATE MATERIAL | LEAD |
| AQGS | PLATE QUANTITY PER CELL | 2 |
| AQHD | NONSPILLING FEATURE | INCLUDED |
| AQHF | CHARGE INDICATOR | NOT INCLUDED |
| AQHG | ELECTROLYTE LEVEL INDICATOR | NOT INCLUDED |
| AQHH | STORAGE/SHIPMENT CONDITION | WET CHARGED |
| AQHJ | INTEGRAL CHARGING FACILITY | NOT INCLUDED |
| CWFH | CASE DESIGN TYPE | SEALED |
| ELEC | VOLTAGE IN VOLTS | 12.0 |
| FEAT | SPECIAL FEATURES | 750 COLD CRANK AMPS; WOUND CELL ELEMENT CONSTRUCTION; POLYPROPYLENE CASE/COVER MATERIAL; VITREOUS FIBER SEPERATOR MATERIAL; 1.300 ELECTROLYTE SPECIFIC GRAVITY; SAE SIDE/BOTTOM HOLD DOWN CONFIG.;3/8-16 POS., 5/16-18 NEG. STUD TERMINALS; 13.5 |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
