32N400APC57 (Pin Straight Headed) by Fairbanks Morse Engine - Request a Quote Now

Part No. : 32N400APC57 Manufacturer : Fairbanks Morse Engine CAGE Code : 50024
Item Name : Pin Straight Headed FSC : 5315 Nails Machine Keys and Pins NSN : 5315-00-417-1498

You can send a request for quote for p/n 32N400APC57 to ASAP Semiconductor using justpartsunlimited.com. This part is manufactured by Fairbanks Morse Engine (CAGE Code 50024). The description of it is Pin Straight Headed. The national stock number associated with this part is NSN 5315004171498. This part belongs to FSC Nails Machine Keys and Pins part family. An associate from ASAP Semiconductor will respond within 15 minutes to your query. It is our pleasure to help you with 32N400APC57 part requirements.

Required fields compulsory *

Contact Information

Note: We will not share your information to any third parties.

  * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms & Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

NSN Information for Part Number 32N400APC57 with NSN 5315-00-417-1498, 5315004171498

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5315-00-417-1498

Item Description:

Pin Straight Headed

53150041714980N
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
32n400apc57225

Characteristics Data of NSN 5315-00-417-1498, 5315004171498

MRCCriteriaCharacteristic
AASKHEAD STYLETEE NO. 3
AASVHEAD LENGTH1.625 INCHES NOMINAL
AAZPCHAMFER LENGTH0.062 INCHES NOMINAL
ABMZDIAMETER1.1290 INCHES MINIMUM AND 1.1299 INCHES MAXIMUM
ABPBUNDER HEAD LENGTH2.813 INCHES NOMINAL
ABQXHEAD WIDTH0.365 INCHES MINIMUM AND 0.369 INCHES MAXIMUM
ABRBHOLE ARRANGEMENT STYLEBOTH END DRILLED
ABRCFIRST HOLE DIAMETER0.125 INCHES NOMINAL
ABRDSECOND HOLE DIAMETER0.125 INCHES NOMINAL
ABREDISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.438 INCHES NOMINAL
ABRFCENTER TO CENTER DISTANCE BETWEEN HOLES1.000 INCHES NOMINAL
CQPJPIN CHAMFER ANGLE45.0 DEGREES NOMINAL
HGTHHEIGHT0.312 INCHES NOMINAL
MATTMATERIALCOPPER ALLOY OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-591 HARD FED SPEC SINGLE MATERIAL RESPONSE OVERALL
STYLSTYLE DESIGNATORSTRAIGHT
ASAP Semiconductor's Certifications and Memberships