FT1025-10-4-5 Part by Fastener Technology Inc with NSN 5305-01-298-9674 - Request a Quote Now

Part Number: FT1025-10-4-5

Manufacturer: fastener technology inc

NSN: 5305-01-298-9674

CAGE Code: 58794

NIIN: 012989674

Item Name : screw assembly pane

INC Code: 33044

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5305 Screws

For competitive procurement options on part number FT1025-10-4-5 from Fastener Technology Inc (CAGE Code 58794), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number FT1025-10-4-5 Details:

Part number FT1025-10-4-5 is manufactured by Fastener Technology Inc and listed with the item name Screw Assembly Pane. Classified under NSN 5305-01-298-9674, the NIIN of this item is 012989674, its INC is 33044, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5305 Screws. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for FT1025-10-4-5

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part FT1025-10-4-5 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number FT1025-10-4-5 with NSN 5305-01-298-9674, 5305012989674

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5305-01-298-9674 Item PartTypeName: SCREW ASSEMBLY,PANEL	5305	012989674	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
10273714-11	5	2	5

Characteristics Data of NSN 5305-01-298-9674, 5305012989674

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A
AASB	FASTENER LENGTH	0.777 INCHES MINIMUM AND 0.817 INCHES MAXIMUM
MATT	MATERIAL	STEEL COMP 301 PRIMARY WASHER
MATT	MATERIAL	STEEL COMP 302 SPRING
SFTT	SURFACE TREATMENT	ANODIZE HEAD
SFTT	SURFACE TREATMENT	PASSIVATE FASTENER
SFTT	SURFACE TREATMENT	PASSIVATE SPRING
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER
AAJF	THREAD DIRECTION	RIGHT-HAND
ABQZ	INTERNAL DRIVE STYLE	SLOT
AASA	THREAD LENGTH	0.542 INCHES MINIMUM AND 0.602 INCHES MAXIMUM
AASK	HEAD STYLE	KNURLED NO. 2
AASL	HEAD DIAMETER	0.451 INCHES NOMINAL
AASU	HEAD HEIGHT	0.290 INCHES NOMINAL
CMLP	THREAD QUANTITY PER INCH	32
MATT	MATERIAL	ALUMINUM ALLOY 6061 HEAD
MATT	MATERIAL	STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 FASTENER
MATT	MATERIAL	STEEL COMP 304 STAND-OFF
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-23195 MIL SPEC SINGLE MATERIAL RESPONSE STAND-OFF
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE HEAD
SFTT	SURFACE TREATMENT	PASSIVATE PRIMARY WASHER
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 TY 1 CL 1 MIL SPEC SINGLE TREATMENT RESPONSE HEAD
AHYM	NOMINAL THREAD DIAMETER	0.190 INCHES
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A580 ASSN STD SINGLE MATERIAL RESPONSE SPRING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER
SFTT	SURFACE TREATMENT	PASSIVATE STAND-OFF
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF
THSD	THREAD SERIES DESIGNATOR	UNF