AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number FT5195-10-12-2P from Fastener Technology Inc (CAGE Code 58794), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number FT5195-10-12-2P Details:
Part number FT5195-10-12-2P is manufactured by Fastener Technology Inc and listed with the item name Nut Self Locking Sp. Classified under NSN 5310-01-522-4091, the NIIN of this item is 015224091, its INC is 15893, and its NCB code is 01 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5310 Nuts and Washers. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-01-522-4091 Item PartTypeName: NUT,SELF-LOCKING,SPLINE | 5310 | 015224091 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| C7592A3M2 | 6 | 2 | 7 |
| MRC | Criteria | Characteristic |
|---|---|---|
| MDCL | Material Document And Classification | AMS 5085 ASSN STD SINGLE MATERIAL RESPONSE BRACKET |
| MATT | Material | STEEL COMP 304 SHELL OR STEEL COMP 305 SHELL |
| STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SHELL AND QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE SHELL |
| MATT | Material | STEEL COMP 1050 NUT OR STEEL COMP 1075 NUT OR STEEL COMP 4130 NUT |
| AAJF | Thread Direction | RIGHT-HAND |
| CQJX | Nominal Thread Size | 0.190 INCHES |
| AGAV | End Item Identification | F-16 AIRCRAFT |
| MDCL | Material Document And Classification | QQ-S-777 FED SPEC 1ST MATERIAL RESPONSE NUT OR AMS 5085 ASSN STD 2ND MATERIAL RESPONSE NUT OR AMS 6351 ASSN STD 2ND MATERIAL RESPONSE NUT |
| CXCY | Part Name Assigned By Controlling Agency | NUT PLATE |
| SFTT | Surface Treatment | CADMIUM NUT |
| AAJD | Thread Class | 3B |
| SFTT | Surface Treatment | PASSIVATE SHELL AND CADMIUM SHELL |
| AAVL | Pilot Diameter | 0.264 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| SFTT | Surface Treatment | CADMIUM BRACKET |
| CQFM | Hardness Rating | 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM |
| ACTA | Nut Style | SPLINE (FLOATING) |
| FEAT | Special Features | HARDNESS RATING APPLIES TO THE BRACKET ONLY, THE NUT HAS A 160 KSI MIN TENSILE STRENGTH |
| CBBL | Features Provided | FLOATING NUT |
| MRC | Decoded Requirement | Clear Text Reply |
| MDCL | Material Document And Classification | MIL-S-23195 MIL SPEC 1ST MATERIAL RESPONSE SHELL OR AMS 5639 ASSN STD 2ND MATERIAL RESPONSE SHELL OR AMS 5514 ASSN STD 2ND MATERIAL RESPONSE SHELL |
| CMLP | Thread Quantity Per Inch | 32 |
| STDC | Surface Treatment Document And Classification | QQ-P-416, TYPE 11, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE BRACKET |
| MATT | Material | STEEL COMP 1050 BRACKET |
| BZRR | Thread Series | UNJF |
| ACVN | Nut Length | 0.547 INCHES MINIMUM AND 0.582 INCHES MAXIMUM |
| AAVM | Pilot Length | 0.440 INCHES NOMINAL |
| AAUM | Locking Feature | PREVAILING TORQUE ALL METAL DESIGN |
| ASDB | Width Across Flats | 0.390 INCHES NOMINAL |
| ADEA | Nut Height | 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| STDC | Surface Treatment Document And Classification | QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| ABAJ | Lubrication | DRY FILM LUBRICANT |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
