GGS776TYPE3 Part by Federal Specifications with NSN 6675-00-641-5721 - Request a Quote Now

Part Number: GGS776TYPE3

Manufacturer: federal specifications

NSN: 6675-00-641-5721

CAGE Code: 81348

NIIN: 006415721

Item Name : straightedge

INC Code: 05155

Country: USA

NCB Code: 00

FSG: 66 Instruments and Laboratory Equipment

FSC: 6675 Drafting Surveying And Mapping Instruments

For competitive procurement options on part number GGS776TYPE3 from Federal Specifications (CAGE Code 81348), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number GGS776TYPE3 Details:

Part number GGS776TYPE3 is manufactured by Federal Specifications and listed with the item name Straightedge. Classified under NSN 6675-00-641-5721, the NIIN of this item is 006415721, its INC is 05155, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 66 Instruments and Laboratory Equipment and Class (FSC) 6675 Drafting Surveying And Mapping Instruments. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for GGS776TYPE3

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part GGS776TYPE3 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 6675-00-641-5721, 6675006415721

MRC	Criteria	Characteristic
SR-1	SPEC/STD CONTROLLING DATA
AWEA	GRADUATIONS	NOT INCLUDED
SR-1	MANUFACTURERS CODE	81348
ABRY	LENGTH	60.000 INCHES NOMINAL
ZZZT	NONDEFINITIVE SPEC/STD DATA	III TYPE
BDDD	MAP RATIO	25000
BDDN	STRAIGHT EDGE LOCATION	BOTH SIDES
APQB	UNIT TYPE	PLOTTING
ABWC	SCALE UNIT OF MEASURE INSCRIPTION	METERS AND YARDS
BDLM	DRAFTING MACHINE CHUCK	NOT PROVIDED
BDLN	MAXIMUM WIDTH	3.000 INCHES
FEAT	SPECIAL FEATURES	W/TWO LIFTING KNOBS
HEAT	HEAT TREATMENT	SEMIHARDENED
AKTG	EDGE TYPE	BEVELED
MATL	MATERIAL	STEEL, CORROSION RESISTING
SR-1	NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	GGS776TYPE3
ABNM	THICKNESS	0.090 INCHES NOMINAL