TURN12 Part by G And L Motion Control Inc with NSN 3408-00-295-3455 - Request a Quote Now

Part Number: TURN12

Manufacturer: g and l motion control inc

NSN: 3408-00-295-3455

CAGE Code: 1SCD2

NIIN: 002953455

Item Name : machining center numerical contr

Country: USA

NCB Code: 00

FSG: 34 Metalworking Machinery

FSC: 3408 Maching Centers and Way Type Machines

For competitive procurement options on part number TURN12 from G And L Motion Control Inc (CAGE Code 1SCD2), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number TURN12 Details:

Part number TURN12 is manufactured by G And L Motion Control Inc and listed with the item name Machining Center Numerical Contr. Classified under NSN 3408-00-295-3455, the NIIN of this item is 002953455, its INC is , and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 34 Metalworking Machinery and Class (FSC) 3408 Maching Centers and Way Type Machines. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for TURN12

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part TURN12 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 3408-00-295-3455, 3408002953455

MRC	Criteria	Characteristic
TEXT	General Characteristics Item Description	HEAD STOCK LONGITUDINAL Z AXIS 35.000 IN.,CROSS SLIDE UNIT TRANSVERSEY AXIS 19.000 IN.,HEADSTOCK SPINDLE C AXIS 360 DEGREES,FEED RATE Z AXIS0 TO 270 IPM,Y AXIS 0 TO 200 IPM,C AXIS 0 TO 10 RPM,RAPID TRAVERSEMAXIMUM FEED RATE,HEADSTOCK SPINDLE HORSEPOWER 20,SPINDLE SPEED RANGE 40TO 1200 RPM,STEPS 3,TOOL SPINDLE HORSEPOWER 32,TOOL SPINDLE HORSEPOWEROUTPUT 3,SPINDLE SPEED RANGE 100 TO 1600 RPM,STEPS 8,WORKPIECES FITTINGWITHIN A CYLINDER 12.000 IN. BY 12.000 IN. LONG,CONTROL SYSTEM GENERALELECTRIC INTERGRATED CIRCUIT,CONTROL SYSTEM RESOLUTION 0.0001 IN. LINEAR0.001 DEGREE ROTARY,TAPE READERS PHOTOELECTRIC 300 CPS,TAPE FORMATSWITCHABLE EIA OR USASCII,LETTER ADDRESS 1.000 IN. 8 CHANNEL
MRC	Decoded Requirement	Clear Text Reply