XM61730 Part by General Dynamics Land Systems Inc with NSN 5330-01-080-3255 - Request a Quote Now

Part Number: XM61730

Manufacturer: general dynamics land systems inc

NSN: 5330-01-080-3255

CAGE Code: 01417

NIIN: 010803255

Item Name : gasket

INC Code: 04522

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5330 Packing and Gasket Materials

For competitive procurement options on part number XM61730 from General Dynamics Land Systems Inc (CAGE Code 01417), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number XM61730 Details:

Part number XM61730 is manufactured by General Dynamics Land Systems Inc and listed with the item name Gasket. Classified under NSN 5330-01-080-3255, the NIIN of this item is 010803255, its INC is 04522, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5330 Packing and Gasket Materials. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for XM61730

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part XM61730 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number XM61730 with NSN 5330-01-080-3255, 5330010803255

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5330-01-080-3255 Item PartTypeName: GASKET	5330	010803255	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
XM61730	5	9	5

Characteristics Data of NSN 5330-01-080-3255, 5330010803255

MRC	Criteria	Characteristic
AAGR	CROSS-SECTIONAL SHAPE STYLE	SOLID SINGLE OR COMPOSITION
AAUB	HOLE DIAMETER	0.430 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
ADPW	OUTSIDE CORNER RADIUS	0.560 INCHES MINIMUM AND 0.660 INCHES MAXIMUM
ADUY	CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	3.000 INCHES NOMINAL
ADUZ	CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	2.470 INCHES NOMINAL
ADVJ	BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE	0.340 INCHES NOMINAL
ADVM	CROSS-SECTIONAL THICKNESS	0.060 INCHES NOMINAL
MATT	MATERIAL	RUBBER SYNTHETIC OVERALL
STYL	STYLE DESIGNATOR	ISOSCELES TRIANGLE