313054 Part by General Dynamics Ots Global Inc with NSN 9390-01-040-8783 - Request a Quote Now

Part Number: 313054

Manufacturer: general dynamics ots global inc

NSN: 9390-01-040-8783

CAGE Code: 04DG4

NIIN: 010408783

Item Name : nonmetallic special shaped secti

Country: USA

NCB Code: 01

FSG: 93 Nonmetallic Fabricated Materials

FSC: 9390 Miscellaneous Fabricated Nonmetallic Materials

For competitive procurement options on part number 313054 from General Dynamics Ots Global Inc (CAGE Code 04DG4), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 313054 Details:

Part number 313054 is manufactured by General Dynamics Ots Global Inc and listed with the item name Nonmetallic Special Shaped Secti. Classified under NSN 9390-01-040-8783, the NIIN of this item is 010408783, its INC is , and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 93 Nonmetallic Fabricated Materials and Class (FSC) 9390 Miscellaneous Fabricated Nonmetallic Materials. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 313054

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 313054 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 9390-01-040-8783, 9390010408783

MRC	Criteria	Characteristic
AASH	Minimum Tensile Strength	700 POUNDS PER SQUARE INCH
MATT	Material	RUBBER SILICONE CLASS Q
AJHG	First Angle In Deg	90
ABMK	Overall Width	0.968 INCHES NOMINAL
AASF	Nonmetallic Hardness Rating	35.0 MINIMUM SHORE DUROMETER A AND 45.0 MAXIMUM SHORE DUROMETER A
ZZZY	Reference Number Differentiating Characteristics	AS DIFFERENTIATED BY LENGTH
AJGQ	Base Flange Width	0.500 INCHES NOMINAL
AJHH	Second Angle In Deg	90
AJJN	First Tip Width	0.093 INCHES NOMINAL
FEAT	Special Features	COLOR,BLACK
ABKW	Overall Height	0.968 INCHES NOMINAL
AJGP	Base Flange Thickness	0.093 INCHES NOMINAL
AJHQ	Lower Flange Edge To Base Distance	0.530 INCHES NOMINAL
AJJH	First/Top Flange Width	0.530 INCHES NOMINAL
ADZC	Environmental Protection	HIGH TEMPERATURE
MRC	Decoded Requirement	Clear Text Reply
ABRY	Length	324.000 INCHES MINIMUM