HH-I-558 FMACL1 Part by General Services Administration Inc with NSN 5640-00-222-8220 - Request a Quote Now

Part Number: HH-I-558 FMACL1

Manufacturer: general services administration inc

NSN: 5640-00-222-8220

CAGE Code: 032Z3

NIIN: 002228220

Item Name : insulation board thermal

Country: USA

NCB Code: 00

FSG: 56 Construction AND Building Materials

FSC: 5640 Wallboard Building Paper and Thermal Insulation Materials

For competitive procurement options on part number HH-I-558 FMACL1 from General Services Administration Inc (CAGE Code 032Z3), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number HH-I-558 FMACL1 Details:

Part number HH-I-558 FMACL1 is manufactured by General Services Administration Inc and listed with the item name Insulation Board Thermal. Classified under NSN 5640-00-222-8220, the NIIN of this item is 002228220, its INC is , and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 56 Construction AND Building Materials and Class (FSC) 5640 Wallboard Building Paper and Thermal Insulation Materials. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for HH-I-558 FMACL1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part HH-I-558 FMACL1 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 5640-00-222-8220, 5640002228220

MRC	Criteria	Characteristic
ABHP	Overall Length	48.000 INCHES NOMINAL
BDBG	Maximum Thermal Conductivity	0.24 AT 25 DEGREE FAHRENHEIT; 0.25 AT 50 DEGREE FAHRENHEIT; 0.26 AT 75 DEGREE FAHRENHEIT; 0.28 AT 100 DEGREE FAHRENHEIT; 0.35 AT 200 DEGREE FAHRENHEIT
BDNR	Long Edge Joint Style	BUTT JOINT
BDNT	Flameproof Feature	NOT INCLUDED
BDNZ	Density Rating	3.00 POUNDS PER CUBIC FOOT
BDBQ	Coverage Width	24.000 INCHES NOMINAL
BDBR	Coverage Length	48.000 INCHES NOMINAL
BDNW	Water Repellent Coated Surface	NOT PROVIDED
BDNX	One Side Decoration Provision	NOT PROVIDED
MRC	Decoded Requirement	Clear Text Reply
ZZZT	Nondefinitive Spec/Std Data	A FORM AND 1 CLASS
ABJH	Temp Rating	400.0 DEG FAHRENHEIT
BDNS	Short Edge Joint Style	BUTT JOINT
ADUM	Overall Thickness	1.000 INCHES NOMINAL
MATT	Material	GLASS FIBER
ABMK	Overall Width	24.000 INCHES NOMINAL