60C-TS Part by Handler Manufacturing Company Inc with NSN 3419-01-081-5305 - Request a Quote Now

Part Number: 60C-TS

Manufacturer: handler manufacturing company inc

NSN: 3419-01-081-5305

CAGE Code: 94859

NIIN: 010815305

Item Name : buffing and polishing machine

INC Code: 13748

Country: USA

NCB Code: 01

FSG: 34 Metalworking Machinery

FSC: 3419 Miscellaneous Machine Tools

For competitive procurement options on part number 60C-TS from Handler Manufacturing Company Inc (CAGE Code 94859), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 60C-TS Details:

Part number 60C-TS is manufactured by Handler Manufacturing Company Inc and listed with the item name Buffing And Polishing Machine. Classified under NSN 3419-01-081-5305, the NIIN of this item is 010815305, its INC is 13748, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 34 Metalworking Machinery and Class (FSC) 3419 Miscellaneous Machine Tools. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 60C-TS

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 60C-TS with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 3419-01-081-5305, 3419010815305

MRC	Criteria	Characteristic
ELEC	Voltage In Volts	115
AHDR	Spindle Length	14.500 INCHES NOMINAL
BCNX	Mounting Type For Which Designed	FLOOR
FAAZ	Phase	SINGLE
ATJK	Power Source	ELECTRIC MOTOR
FREQ	Frequency In Hertz	60
BQMC	Distance Between Inside Wheel Flanges On Spindle	11.219 INCHES NOMINAL
MRC	Decoded Requirement	Clear Text Reply
BMYP	Spindle End Type	DOUBLE
BMYR	Spindle Speed In Rpm	1725.0 MINIMUM AND 3450.0 MAXIMUM
ANCY	Horsepower Rating	0.25
BQLY	Distance From Spindle Center To Mounting	5.750 INCHES NOMINAL
BQXC	Spindle Diameter Between Flanges	0.500 INCHES NOMINAL
NMBR	Quantity	1
ACDC	Current Type	AC