HI-2-3025 Part by Hhe Services Incorporated with NSN 4720-01-453-5135 - Request a Quote Now

Part Number: HI-2-3025

Manufacturer: hhe services incorporated

NSN: 4720-01-453-5135

CAGE Code: 7N931

NIIN: 014535135

Item Name : hose assembly nonmetallic

INC Code: 20311

Country: USA

NCB Code: 01

FSG: 47 Pipe Tubing Hose and Fittings

FSC: 4720 Hose and Tubing Flexible

For competitive procurement options on part number HI-2-3025 from Hhe Services Incorporated (CAGE Code 7N931), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number HI-2-3025 Details:

Part number HI-2-3025 is manufactured by Hhe Services Incorporated and listed with the item name Hose Assembly Nonmetallic. Classified under NSN 4720-01-453-5135, the NIIN of this item is 014535135, its INC is 20311, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 47 Pipe Tubing Hose and Fittings and Class (FSC) 4720 Hose and Tubing Flexible. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for HI-2-3025

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part HI-2-3025 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number HI-2-3025 with NSN 4720-01-453-5135, 4720014535135

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
4720-01-453-5135 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC	4720	014535135	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
1-1/2X13 2651-24 W/25941124BE	5	2	5

Characteristics Data of NSN 4720-01-453-5135, 4720014535135

MRC	Criteria	Characteristic
FEAT	Special Features	INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC
ABKV	Outside Diameter	2.120 INCHES NOMINAL
CQCS	Layer Composition And Location	3RD LAYER SPIRALLY WRAPPED STEEL FABRIC
CRWL	Inside Surface Condition	SMOOTH
AAJF	Thread Direction	RIGHT-HAND 1ST END
MRC	Decoded Requirement	Clear Text Reply
CQGM	Maximum Operating Pressure	2500.0 POUNDS PER SQUARE INCH
ABJH	Temp Rating	-40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE
AKUU	End Connection Design	STRAIGHT 1ST END
THSD	Thread Series Designator	UN 1ST END
CRDW	Hydrostatic Test Pressure	5000.0 POUNDS PER SQUARE INCH
AAJD	Thread Class	3B 1ST END
AKXL	End Fitting Component And Material	COMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS
AKXM	Fitting Component And Surface Treatment	COMPLETE FITTING ZINC 1ST END
CQBD	Burst Test Pressure	10000.0 POUNDS PER SQUARE INCH
CBBL	Features Provided	REUSABLE END FITTINGS
ACKH	Minimum Inside Bending Radius	20.000 INCHES
AARX	Inside Diameter	1.500 INCHES NOMINAL
MEDA	Media For Which Designed	FUEL/OIL, HYDROCARBON SINGLE RESPONSE
AWLS	Connection Type	THREADED INTERNAL TUBE 1ST END
CQRB	Seat Angle	37.0 DEGREES 1ST END
CMLP	Thread Quantity Per Inch	12 1ST END
AGAV	End Item Identification	USED ON STRATEGIC SEALIFT CONVERSION SHIPS CLASS
CQCS	Layer Composition And Location	4TH LAYER SPIRALLY WRAPPED STEEL FABRIC
AAGR	Cross-Sectional Shape Style	ROUND
CQJX	Nominal Thread Size	1.875 INCHES 1ST END
CQCS	Layer Composition And Location	OUTER LAYER MOLDED RUBBER, SYNTHETIC
CQCS	Layer Composition And Location	1ST LAYER SPIRALLY WRAPPED STEEL FABRIC
AHNC	Connection Style	SWIVEL NUT FLARE 1ST END
CQCS	Layer Composition And Location	2ND LAYER SPIRALLY WRAPPED STEEL FABRIC