M71AS16G Part by Holmes E G And Associates Inc with NSN 3120-00-544-1574 - Request a Quote Now

Part Number: M71AS16G

Manufacturer: holmes e g and associates inc

NSN: 3120-00-544-1574

CAGE Code: 76134

NIIN: 005441574

Item Name : bearing plain self aligning

INC Code: 13208

Country: USA

NCB Code: 00

FSG: 31 Bearings

FSC: 3120 Bearings Plain Unmounted

For competitive procurement options on part number M71AS16G from Holmes E G And Associates Inc (CAGE Code 76134), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number M71AS16G Details:

Part number M71AS16G is manufactured by Holmes E G And Associates Inc and listed with the item name Bearing Plain Self Aligning. Classified under NSN 3120-00-544-1574, the NIIN of this item is 005441574, its INC is 13208, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3120 Bearings Plain Unmounted. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for M71AS16G

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part M71AS16G with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number M71AS16G with NSN 3120-00-544-1574, 3120005441574

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3120-00-544-1574 Item PartTypeName: BEARING,PLAIN,SELF-ALIGNING	3120	005441574	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
4M71AS16G	2	2	1

Characteristics Data of NSN 3120-00-544-1574, 3120005441574

MRC	Criteria	Characteristic
ABXV	BORE DIAMETER	0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM
AGGF	OUTER MEMBER OUTSIDE DIAMETER	1.7495 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM
AGGH	OUTER MEMBER WIDTH	0.7920 INCHES NOMINAL
AGGJ	INNER MEMBER WIDTH	0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM
CTLM	LUBRICATION FEATURE	GROOVE INTERNAL INNER MEMBER
FEAT	SPECIAL FEATURES	BORE ONLY SHALL BE COATED WITH RUST RETARDING MIXTURE
SFTT	SURFACE TREATMENT	CHROMIUM INNER MEMBER
STYL	STYLE DESIGNATOR	WITHOUT INSERT OR LINER