3M1170C4D11A Part by Houston Precision Fastener L L C with NSN 5305-01-494-0615 - Request a Quote Now

Part Number: 3M1170C4D11A

Manufacturer: houston precision fastener l l c

NSN: 5305-01-494-0615

CAGE Code: 1VSL7

NIIN: 014940615

Item Name : screw close toleran

INC Code: 29294

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5305 Screws

For competitive procurement options on part number 3M1170C4D11A from Houston Precision Fastener L L C (CAGE Code 1VSL7), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 3M1170C4D11A Details:

Part number 3M1170C4D11A is manufactured by Houston Precision Fastener L L C and listed with the item name Screw Close Toleran. Classified under NSN 5305-01-494-0615, the NIIN of this item is 014940615, its INC is 29294, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5305 Screws. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 3M1170C4D11A

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 3M1170C4D11A with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 3M1170C4D11A with NSN 5305-01-494-0615, 5305014940615

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5305-01-494-0615 Item PartTypeName: SCREW,CLOSE TOLERANCE	5305	014940615	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
11825C4-11A	5	2	5

Characteristics Data of NSN 5305-01-494-0615, 5305014940615

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A"
AAJF	THREAD DIRECTION	RIGHT-HAND"
AASA	THREAD LENGTH	0.425 INCHES NOMINAL"
AASB	FASTENER LENGTH	1.092 INCHES MINIMUM AND 1.122 INCHES MAXIMUM"
AASK	HEAD STYLE	FLAT COUNTERSUNK"
AASL	HEAD DIAMETER	0.358 INCHES MINIMUM AND 0.365 INCHES MAXIMUM"
AAUH	SPLINE MINOR DIAMETER	0.1105 INCHES MINIMUM AND 0.1125 INCHES MAXIMUM"
AAUJ	SPLINE MAJOR DIAMETER	0.1540 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM"
AAUR	GRIP DIAMETER	0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM"
ABQZ	INTERNAL DRIVE STYLE	TORX"
AGAV	END ITEM IDENTIFICATION	F18 E/F"
AHYM	NOMINAL THREAD DIAMETER	0.250 INCHES"
ANEE	GRIP LENGTH	0.672 INCHES MINIMUM AND 0.692 INCHES MAXIMUM"
CMLP	THREAD QUANTITY PER INCH	28"
CRSQ	COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM"
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	BOLT, 100 DEGREE HEAD, GEAR DRIVE RECESS-PH13-8MO (125 KSI SHEAR), INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (95 KSI SHEAR)"
MATT	MATERIAL	NICKEL ALLOY 718 OVERALL"
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL"
THSD	THREAD SERIES DESIGNATOR	UNJF"
AAJD	THREAD CLASS	3A"
AAJF	THREAD DIRECTION	RIGHT-HAND"
AASA	THREAD LENGTH	0.425 INCHES NOMINAL"
AASB	FASTENER LENGTH	1.092 INCHES MINIMUM AND 1.122 INCHES MAXIMUM"
AASK	HEAD STYLE	FLAT COUNTERSUNK"
AASL	HEAD DIAMETER	0.358 INCHES MINIMUM AND 0.365 INCHES MAXIMUM"
AAUH	SPLINE MINOR DIAMETER	0.1105 INCHES MINIMUM AND 0.1125 INCHES MAXIMUM"
AAUJ	SPLINE MAJOR DIAMETER	0.1540 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM"
AAUR	GRIP DIAMETER	0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM"
ABQZ	INTERNAL DRIVE STYLE	TORX"
AGAV	END ITEM IDENTIFICATION	F18 E/F"
AHYM	NOMINAL THREAD DIAMETER	0.250 INCHES"
ANEE	GRIP LENGTH	0.672 INCHES MINIMUM AND 0.692 INCHES MAXIMUM"
CMLP	THREAD QUANTITY PER INCH	28"
CRSQ	COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM"
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	BOLT, 100 DEGREE HEAD, GEAR DRIVE RECESS-PH13-8MO (125 KSI SHEAR), INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (95 KSI SHEAR)"
MATT	MATERIAL	NICKEL ALLOY 718 OVERALL"
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL"
THSD	THREAD SERIES DESIGNATOR	UNJF"