ST3M453-5D83 Part by Houston Precision Fastener L L C with NSN 5306-01-623-6380 - Request a Quote Now

Part Number: ST3M453-5D83

Manufacturer: houston precision fastener l l c

NSN: 5306-01-623-6380

CAGE Code: 1VSL7

NIIN: 016236380

Item Name : bolt close toleranc

INC Code: 27851

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5306 Bolts

For competitive procurement options on part number ST3M453-5D83 from Houston Precision Fastener L L C (CAGE Code 1VSL7), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number ST3M453-5D83 Details:

Part number ST3M453-5D83 is manufactured by Houston Precision Fastener L L C and listed with the item name Bolt Close Toleranc. Classified under NSN 5306-01-623-6380, the NIIN of this item is 016236380, its INC is 27851, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5306 Bolts. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for ST3M453-5D83

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part ST3M453-5D83 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number ST3M453-5D83 with NSN 5306-01-623-6380, 5306016236380

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5306-01-623-6380 Item PartTypeName: BOLT,CLOSE TOLERANCE	5306	016236380	0	N	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		A	A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
109453-5D83	5	2	3

Characteristics Data of NSN 5306-01-623-6380, 5306016236380

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A"
AAJF	THREAD DIRECTION	RIGHT-HAND"
AASA	THREAD LENGTH	0.467 INCHES NOMINAL"
AASB	FASTENER LENGTH	5.6545 INCHES NOMINAL"
AASK	HEAD STYLE	DOUBLE HEXAGON"
AASU	HEAD HEIGHT	0.187 INCHES NOMINAL"
AATB	WIDTH BETWEEN FLATS	0.502 INCHES MAXIMUM"
AAUR	GRIP DIAMETER	0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM"
AAWB	SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM THREADS"
AGAV	END ITEM IDENTIFICATION	A-10 WRP"
AHYM	NOMINAL THREAD DIAMETER	0.3125 INCHES"
ANEE	GRIP LENGTH	5.1875 INCHES NOMINAL"
CMLP	THREAD QUANTITY PER INCH	24"
CQBC	MINIMUM TENSILE STRENGTH	125000 POUNDS PER SQUARE INCH"
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	5.535 INCHES NOMINAL THREADS"
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	BOLT, CLOSE TOLERANCE-DOUBLE HEX HEAD"
MATT	MATERIAL	STEEL COMP XM-13 OVERALL"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5629 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL"
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	AMS 2700 METHOD 1 NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE OVERALL"
THSD	THREAD SERIES DESIGNATOR	UNJF"
AAJD	THREAD CLASS	3A"
AAJF	THREAD DIRECTION	RIGHT-HAND"
AASA	THREAD LENGTH	0.467 INCHES NOMINAL"
AASB	FASTENER LENGTH	5.6545 INCHES NOMINAL"
AASK	HEAD STYLE	DOUBLE HEXAGON"
AASU	HEAD HEIGHT	0.187 INCHES NOMINAL"
AATB	WIDTH BETWEEN FLATS	0.502 INCHES MAXIMUM"
AAUR	GRIP DIAMETER	0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM"
AAWB	SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM THREADS"
AGAV	END ITEM IDENTIFICATION	A-10 WRP"
AHYM	NOMINAL THREAD DIAMETER	0.3125 INCHES"
ANEE	GRIP LENGTH	5.1875 INCHES NOMINAL"
CMLP	THREAD QUANTITY PER INCH	24"
CQBC	MINIMUM TENSILE STRENGTH	125000 POUNDS PER SQUARE INCH"
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	5.535 INCHES NOMINAL THREADS"
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	BOLT, CLOSE TOLERANCE-DOUBLE HEX HEAD"
MATT	MATERIAL	STEEL COMP XM-13 OVERALL"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5629 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL"
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	AMS 2700 METHOD 1 NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE OVERALL"
THSD	THREAD SERIES DESIGNATOR	UNJF"