HT123-4-5DP Part by Huck International Inc with NSN 5305-01-262-4721 - Request a Quote Now

Part Number: HT123-4-5DP

Manufacturer: huck international inc

NSN: 5305-01-262-4721

CAGE Code: 97928

NIIN: 012624721

Item Name : screw close toleran

INC Code: 29294

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5305 Screws

For competitive procurement options on part number HT123-4-5DP from Huck International Inc (CAGE Code 97928), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number HT123-4-5DP Details:

Part number HT123-4-5DP is manufactured by Huck International Inc and listed with the item name Screw Close Toleran. Classified under NSN 5305-01-262-4721, the NIIN of this item is 012624721, its INC is 29294, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5305 Screws. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for HT123-4-5DP

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part HT123-4-5DP with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 5305-01-262-4721, 5305012624721

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
AASB	FASTENER LENGTH	0.453 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
AASK	HEAD STYLE	FLAT COUNTERSUNK
AASL	HEAD DIAMETER	0.501 INCHES MINIMUM AND 0.506 INCHES MAXIMUM
AAUR	GRIP DIAMETER	0.2487 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
AAWB	SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES NOMINAL FIRST HOLE
ABQZ	INTERNAL DRIVE STYLE	HIGH-TORQUE
AHYM	NOMINAL THREAD DIAMETER	0.250 INCHES
ANEE	GRIP LENGTH	0.296 INCHES MINIMUM AND 0.343 INCHES MAXIMUM
CMLP	THREAD QUANTITY PER INCH	28
CQFM	HARDNESS RATING	24.0 ROCKWELL C MINIMUM OVERALL AND 44.0 ROCKWELL C MAXIMUM OVERALL
CRSQ	COUNTERSINK ANGLE	100.0 DEGREES NOMINAL
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	0.624 INCHES NOMINAL FIRST HOLE
MATT	MATERIAL	IRON ALLOY 660 OVERALL
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSD	THREAD SERIES DESIGNATOR	UNF