OSB100 T08 07 Part by Huck International Inc with NSN 5320-01-224-7216 - Request a Quote Now

Part Number: OSB100 T08 07

Manufacturer: huck international inc

NSN: 5320-01-224-7216

CAGE Code: 29666

NIIN: 012247216

Item Name : rivet blind

INC Code: 00864

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5320 Rivets

For competitive procurement options on part number OSB100 T08 07 from Huck International Inc (CAGE Code 29666), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number OSB100 T08 07 Details:

Part number OSB100 T08 07 is manufactured by Huck International Inc and listed with the item name Rivet Blind. Classified under NSN 5320-01-224-7216, the NIIN of this item is 012247216, its INC is 00864, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5320 Rivets. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for OSB100 T08 07

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part OSB100 T08 07 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 5320-01-224-7216, 5320012247216

MRC	Criteria	Characteristic
CRSQ	Countersink Angle	99.0 DEGREES MINIMUM AND
MATT	Material	STEEL COMP 8740 STEM
MATT	Material	STEEL COMP 4037 SLEEVE
AASB	Fastener Length	0.656 INCHES NOMINAL
MATT	Material	STEEL MECHANICAL LOCK
MATT	Material	STEEL COMP 4027 OR
AAZE	Shank Diameter	0.274 INCHES MINIMUM AND
ABAF	Expansion Device	SERRATED STEM-TYPE W
CQSX	Shear Strength	112000 SINGLE POUNDS PER SQUARE INCH
CQBC	Minimum Tensile Strength	3650 POUNDS PER SQUARE INCH
SFTT	Surface Treatment	CADMIUM OVERALL
ANEE	Grip Length	0.470 INCHES MAXIMUM
STDC	Surface Treatment Document And Classification	MIL-F-81177 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
AASK	Head Style	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
AAZE	Shank Diameter	0.276 INCHES MAXIMUM
CRSQ	Countersink Angle	101.0 DEGREES MAXIMUM
ANEE	Grip Length	0.406 INCHES MINIMUM AND
AAZG	Head Major Diameter	0.507 INCHES MAXIMUM
MRC	Decoded Requirement	Clear Text Reply
AAZF	Shank Style	SELF-PLUGGING MECHANICALLY LOCKED STEM
MDCL	Material Document And Classification	AISI ASSN STD SINGLE MATERIAL RESPONSE STEM
MDCL	Material Document And Classification	AISI ASSN STD ALL MATERIAL RESPONSES SLEEVE