SD2013PC19 Part by Imo Industries Inc with NSN 5310-00-281-2471 - Request a Quote Now

Part Number: SD2013PC19

Manufacturer: imo industries inc

NSN: 5310-00-281-2471

CAGE Code: 59180

NIIN: 002812471

Item Name : washer keyway

INC Code: 06158

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

FSC: 5310 Nuts and Washers

For competitive procurement options on part number SD2013PC19 from Imo Industries Inc (CAGE Code 59180), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number SD2013PC19 Details:

Part number SD2013PC19 is manufactured by Imo Industries Inc and listed with the item name Washer Keyway. Classified under NSN 5310-00-281-2471, the NIIN of this item is 002812471, its INC is 06158, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5310 Nuts and Washers. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for SD2013PC19

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part SD2013PC19 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number SD2013PC19 with NSN 5310-00-281-2471, 5310002812471

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5310-00-281-2471 Item PartTypeName: WASHER,KEYWAY	5310	002812471	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
S810F	6	2	3

Characteristics Data of NSN 5310-00-281-2471, 5310002812471

MRC	Criteria	Characteristic
AAUB	HOLE DIAMETER	1.870 INCHES MINIMUM AND 1.875 INCHES MAXIMUM
ABKV	OUTSIDE DIAMETER	3.000 INCHES NOMINAL
ABLM	INTERNAL KEYWAY WIDTH	0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM
ABLR	DISTANCE FROM CENTERLINE TO BOTTOM OF INTERNAL KEYWAY	1.560 INCHES MINIMUM AND 1.570 INCHES MAXIMUM
ABMV	INTERNAL KEYWAY QUANTITY	1
ABPX	MATERIAL THICKNESS	0.625 INCHES NOMINAL
MATT	MATERIAL	STEEL COMP 2 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-890 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL