PG100 Part by Interface Technology Inc with NSN 6625-01-472-7800 - Request a Quote Now

Part Number: PG100

Manufacturer: interface technology inc

NSN: 6625-01-472-7800

CAGE Code: 5J927

NIIN: 014727800

Item Name : plug in unit electrical electron

INC Code: 66495

Country: USA

NCB Code: 01

FSG: 66 Instruments and Laboratory Equipment

FSC: 6625 Electrical And Electronic Properties Measuring And Testing Instruments

For competitive procurement options on part number PG100 from Interface Technology Inc (CAGE Code 5J927), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number PG100 Details:

Part number PG100 is manufactured by Interface Technology Inc and listed with the item name Plug In Unit Electrical Electron. Classified under NSN 6625-01-472-7800, the NIIN of this item is 014727800, its INC is 66495, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 66 Instruments and Laboratory Equipment and Class (FSC) 6625 Electrical And Electronic Properties Measuring And Testing Instruments. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for PG100

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part PG100 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 6625-01-472-7800, 6625014727800

MRC	Criteria	Characteristic
APQB	Unit Type	PULSE GENERATOR
FEAT	Special Features	MFG NAME IS PULSE GENERATOR, 10HZ TO 100MHZ, TWO OUTPUT CHANNELS, PROGRAMMABLE PLUSE WIDTHS OR DUTY CYCLES, 24 V P-P PROGRAMMABLE AMPLETUDE POM 12 V RANGEPROGRAMMABLE TRANSITION TIMES OR SLEW RATES PROGRAMMABLE DELAY, DOUBLE PULSE AND INVERTED PULSE MODES, AUTO, TRIGGERED, COUNTED BURST, TIMED COUNTED BURST, GATED, EXTERNAL WIDTH, AND MASTER / SLAVE MODES. INTERNAL, EXTERNAL, OR VXI TTLTRG TRIGGERS. SAVE AND RECALL UP TO 10 SETUPS TO NON-VOLATILE RAM. SUPPORTS SCPI AND IEEE 488.2 COMMANDS; ELECTROSTATIC DISCHARGE SENSITIVE
CRTL	Criticality Code Justification	FEAT
MRC	Decoded Requirement	Clear Text Reply