C-A00050PIECE9 Part by Jaeco Fluid Systems Inc with NSN 3110-00-135-9657 - Request a Quote Now

Part Number: C-A00050PIECE9

Manufacturer: jaeco fluid systems inc

NSN: 3110-00-135-9657

CAGE Code: 30863

NIIN: 001359657

Item Name : bearing roller tapered

INC Code: 00021

Country: USA

NCB Code: 00

FSG: 31 Bearings

FSC: 3110 Bearings Antifriction Unmounted

For competitive procurement options on part number C-A00050PIECE9 from Jaeco Fluid Systems Inc (CAGE Code 30863), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number C-A00050PIECE9 Details:

Part number C-A00050PIECE9 is manufactured by Jaeco Fluid Systems Inc and listed with the item name Bearing Roller Tapered. Classified under NSN 3110-00-135-9657, the NIIN of this item is 001359657, its INC is 00021, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3110 Bearings Antifriction Unmounted. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for C-A00050PIECE9

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part C-A00050PIECE9 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number C-A00050PIECE9 with NSN 3110-00-135-9657, 3110001359657

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-00-135-9657 Item PartTypeName: BEARING,ROLLER,TAPERED	3110	001359657	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
03316055	2	2	5

Characteristics Data of NSN 3110-00-135-9657, 3110001359657

MRC	Criteria	Characteristic
ABMK	OVERALL WIDTH	0.5450 INCHES MINIMUM AND 0.5590 INCHES MAXIMUM
ABXV	BORE DIAMETER	0.6875 INCHES MINIMUM AND 0.6883 INCHES MAXIMUM
ADGA	OVERALL OUTSIDE DIAMETER	1.5700 INCHES MINIMUM AND 1.5710 INCHES MAXIMUM
AGWU	BACKFACE CORNER RADIUS	0.0500 INCHES NOMINAL
AGWV	STANDOUT WIDTH	0.1250 INCHES NOMINAL
AGWW	CONE CORNER RADIUS	0.0500 INCHES NOMINAL
AGWX	CONE WIDTH	0.5750 INCHES NOMINAL
AGWY	CUP WIDTH	0.4200 INCHES NOMINAL
MATT	MATERIAL	STEEL OVERALL
STYL	STYLE DESIGNATOR	STRAIGHT BORE,NORMAL ANGLE