DP27782 Part by John Deere Component Works with NSN 4720-01-308-0558 - Request a Quote Now

Part Number: DP27782

Manufacturer: john deere component works

NSN: 4720-01-308-0558

CAGE Code: 66834

NIIN: 013080558

Item Name : hose assembly nonmetallic

INC Code: 20311

Country: USA

NCB Code: 01

FSG: 47 Pipe Tubing Hose and Fittings

FSC: 4720 Hose and Tubing Flexible

For competitive procurement options on part number DP27782 from John Deere Component Works (CAGE Code 66834), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number DP27782 Details:

Part number DP27782 is manufactured by John Deere Component Works and listed with the item name Hose Assembly Nonmetallic. Classified under NSN 4720-01-308-0558, the NIIN of this item is 013080558, its INC is 20311, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 47 Pipe Tubing Hose and Fittings and Class (FSC) 4720 Hose and Tubing Flexible. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for DP27782

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part DP27782 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number DP27782 with NSN 4720-01-308-0558, 4720013080558

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
4720-01-308-0558 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC	4720	013080558	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
DP27782	2	2	5

Characteristics Data of NSN 4720-01-308-0558, 4720013080558

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	2B 1ST END
CQRB	SEAT ANGLE	37.0 DEGREES 1ST END
CRWL	INSIDE SURFACE CONDITION	SMOOTH
MEDA	MEDIA FOR WHICH DESIGNED	FUEL/OIL,HYDROCARBON SINGLE RESPONSE
AAJF	THREAD DIRECTION	RIGHT-HAND 1ST END
AGAV	END ITEM IDENTIFICATION	LOADER 644 JOHN DEERE
AKXL	END FITTING COMPONENT AND MATERIAL	COMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS
AWLS	CONNECTION TYPE	THREADED INTERNAL TUBE 1ST END
CQBD	BURST TEST PRESSURE	9000.0 POUNDS PER SQUARE INCH
CQCS	LAYER COMPOSITION AND LOCATION	1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER MOLDED RUBBER,SYNTHETIC AND 3RD LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER,SYNTHETIC
CQJX	NOMINAL THREAD SIZE	1.187 INCHES 2ND END
CQJX	NOMINAL THREAD SIZE	1.437 INCHES 1ST END
CQRB	SEAT ANGLE	37.0 DEGREES 2ND END
CRFY	FLOW ANGLE	90.0 DEGREES 2ND END
CRXX	MEASURING METHOD AND LENGTH	75.500 INCHES NOMINAL WORKING
AHNC	CONNECTION STYLE	SWIVEL NUT FLARE 2ND END
AKUU	END CONNECTION DESIGN	ELBOW 2ND END
AKUU	END CONNECTION DESIGN	STRAIGHT 1ST END
AWLS	CONNECTION TYPE	THREADED INTERNAL TUBE 2ND END
CMLP	THREAD QUANTITY PER INCH	12 1ST END
CMLP	THREAD QUANTITY PER INCH	12 2ND END
CQGM	MAXIMUM OPERATING PRESSURE	2250.0 POUNDS PER SQUARE INCH
FEAT	SPECIAL FEATURES	INNER CONVEYING TUBE MATERIAL-RUBBER,SYNTHETIC
THSD	THREAD SERIES DESIGNATOR	UN 1ST END
THSD	THREAD SERIES DESIGNATOR	UN 2ND END
AAGR	CROSS-SECTIONAL SHAPE STYLE	ROUND
AAJD	THREAD CLASS	2B 2ND END
AARX	INSIDE DIAMETER	0.750 INCHES NOMINAL
ABJH	TEMP RATING	-40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE
ABKV	OUTSIDE DIAMETER	1.160 INCHES NOMINAL
ACKH	MINIMUM INSIDE BENDING RADIUS	9.500 INCHES
AHNC	CONNECTION STYLE	SWIVEL NUT FLARE 1ST END
AAJF	THREAD DIRECTION	RIGHT-HAND 2ND END
ZZZK	SPECIFICATION/STANDARD DATA	SAE 100R2AT SIZE 12-81343 NATIONAL STD/SPEC