AN-GSM-388 Part by Joint Electronics Type Designation System with NSN 4935-01-388-7349 - Request a Quote Now

Part Number: AN-GSM-388

Manufacturer: joint electronics type designation system

NSN: 4935-01-388-7349

CAGE Code: 80058

NIIN: 013887349

Item Name : test station guided

INC Code: 28475

Country: USA

NCB Code: 01

FSG: 49 Maintenance and Repair Shop Equipment

FSC: 4935 Guided Missile Maintenance Repair And Checkout Specialized Equipment

For competitive procurement options on part number AN-GSM-388 from Joint Electronics Type Designation System (CAGE Code 80058), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number AN-GSM-388 Details:

Part number AN-GSM-388 is manufactured by Joint Electronics Type Designation System and listed with the item name Test Station Guided. Classified under NSN 4935-01-388-7349, the NIIN of this item is 013887349, its INC is 28475, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 49 Maintenance and Repair Shop Equipment and Class (FSC) 4935 Guided Missile Maintenance Repair And Checkout Specialized Equipment. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for AN-GSM-388

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part AN-GSM-388 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 4935-01-388-7349, 4935013887349

MRC	Criteria	Characteristic
SR-5	MANUFACTURERS CODE	82577
AGAV	END ITEM IDENTIFICATION	129 AGM
FTLD	III FUNCTIONAL DESCRIPTION	USED TO TEST SENSOR UNIT ON GUIDED MISSLE; SPECIFICALLY USED AS PART OFALIGNMENT SYSTEM OF EN6 SENSOR
SR-5	DESIGN CONTROL REFERENCE	T4618300-22
FEAT	SPECIAL FEATURES	C/O DATA ACQUISITION SYSTEM, 1; POWER CONTROL PANEL, 1; PWR SUPPLIES, 2; STEP MOTOR CONTROLLER, 1; TEST CONTROL PANEL, 1; POINTING MODULE HOLDING FIXTURE, 1; DIGITAL MULTIMETER, 1; OSCILLOSCOPE, 1; OPTICAL ENCODER, 1; 120.0/208.0 VAC, 60 HZ, 3-PHASE; 60.000 IN. H.; 98.000 IN. L.; 48.000 IN. W.; 1500 LBS
SR-5	THE MANUFACTURERS DATA
SUPP	III SUPPLEMENTARY FEATURES	DRAWING NAME-POINTER SERVO TEST STATION