AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number OS-185-U from Joint Electronics Type Designation System (CAGE Code 80058), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number OS-185-U Details:
Part number OS-185-U is manufactured by Joint Electronics Type Designation System and listed with the item name Oscilloscope. Classified under NSN 6625-00-069-5477, the NIIN of this item is 000695477, its INC is 00357, and its NCB code is 00 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 66 Instruments and Laboratory Equipment and Class (FSC) 6625 Electrical And Electronic Properties Measuring And Testing Instruments. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| MRC | Criteria | Characteristic |
|---|---|---|
| AXGY | Mounting Method | RACK |
| AMSE | Voltage Rating | 115.0 VOLTS MINIMUM AND 230.0 VOLTS MAXIMUM |
| FEAT | Special Features | PUSH BUTTON BEAM FINDER;INTERNAL GRATICULE CRT;COMMON MODE REFLECTION BELOW 40 DB FOR 0.2 7V/CM TO 0.2 V/CM,BELOW 30 DB FROM 0.5 V/CM TO 20 V/CM; PHASE SHIFT LESS THAN ONE DEGREE UP TO 100 KHZ;BALANCED INPUT ON ALL RANGES;FRONT PANEL SINGLE SWEEP SWITCH |
| ATES | Beam Quantity | 1 |
| ZZZV | Fsc Application Data | OSCILLOSCOPES,EXCEPT SPECIALLY DESIGNED |
| ABKW | Overall Height | 6.781 INCHES NOMINAL |
| ACZB | Frequency Rating | 50.0 HERTZ NOMINAL |
| FAAZ | Phase | SINGLE |
| BGQK | Screen Size | 5.000 IN. |
| BGQN | Sweep Circuit Type | HORIZONTAL AND VERTICAL |
| BGQQ | Single Trigger Sweep Duration | 500.0 SECONDS NOMINAL |
| BGQL | Sweep Circuits | INCLUDED |
| BGQM | Generator Driven Feature | INCLUDED |
| BGSC | Trigger Sweep Marker Intervals | 0.2 USEC |
| BGRZ | Trigger Sweep Voltage Amplitude Rating | 10.0 VOLTS NOMINAL |
| BGSB | Trigger Sweep Polarity Switch | INCLUDED |
| BHDD | Amplifier Deflection Sensitivity Provision | PROVIDED |
| ABMK | Overall Width | 16.750 INCHES NOMINAL |
| BHDH | Input Intensity Modulation Feature | PROVIDED |
| BHDK | Visual Blanking Sensitivity Voltage Rating | 20.0 VOLTS NOMINAL |
| BHDQ | X-Axis Frequency Response Rating | 599.0 KILOHERTZ NOMINAL |
| BHDT | Amplifier Input Impedance Rating Provision | PROVIDED |
| BHDZ | Amplitude Calibrating Voltage Waveform | SQUARE WAVE |
| BHFC | Measurement Range Quantity | 16 |
| BHFH | Trace Storage Tube | NOT INCLUDED |
| BHDF | Vertical Deflection Sensitivity Voltage Rating | 0.5 VOLTS MINIMUM RMS PER INCH AND 50.0 VOLTS MAXIMUM RMS PER INCH |
| BHDG | Horizontal Deflection Sensitivity Voltage Rating | 0.5 VOLTS MINIMUM RMS PER INCH AND 50.0 VOLTS PEAK OUTSIDE DIAMETER |
| BHDL | Plate Direct Connection Deflection Sensitivity Provision | NOT PROVIDED |
| BHDP | Frequency Response Rating | PROVIDED |
| BHDW | X-Axis Input Impedance Rating | 1.0 MEGOHMS NOMINAL |
| BHDX | Y-Axis Input Impedance Rating | 1.0 MEGOHMS NOMINAL |
| BHFD | Measurement Range Steps | 0 TO 20 V PER CM |
| BHFF | Calibrated Screen Scale | NOT INCLUDED |
| MRC | Decoded Requirement | Clear Text Reply |
| BDJD | Accuracy Range In Percent | -1 |
| ACDC | Current Type | AC |
| BGQP | Sweep Frequency Range | +5.000/+10000.000 HERTZ |
| BGSD | Expanded Sweep | PROVIDED |
| BHDJ | Visual Modulation Sensitivity Voltage Rating | 2.0 VOLTS NOMINAL |
| BHDR | Y-Axis Frequency Response Rating | 500.0 KILOHERTZ NOMINAL |
| BHFB | Calibrating Peak To Peak Amplitude | 10.0 MILLIVOLTS NOMINAL |
| BHFT | Camera Recording Device Accommodation | NOT PROVIDED |
| ABHP | Overall Length | 18.375 INCHES NOMINAL |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
