B38599-2 Part by Joint Oil Analysis Program with NSN 3120-01-309-1580 - Request a Quote Now

Part Number: B38599-2

Manufacturer: joint oil analysis program

NSN: 3120-01-309-1580

CAGE Code: 07RP9

NIIN: 013091580

Item Name : bushing sleeve

INC Code: 13206

Country: USA

NCB Code: 01

FSG: 31 Bearings

FSC: 3120 Bearings Plain Unmounted

For competitive procurement options on part number B38599-2 from Joint Oil Analysis Program (CAGE Code 07RP9), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number B38599-2 Details:

Part number B38599-2 is manufactured by Joint Oil Analysis Program and listed with the item name Bushing Sleeve. Classified under NSN 3120-01-309-1580, the NIIN of this item is 013091580, its INC is 13206, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3120 Bearings Plain Unmounted. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for B38599-2

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part B38599-2 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number B38599-2 with NSN 3120-01-309-1580, 3120013091580

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3120-01-309-1580 Item PartTypeName: BUSHING,SLEEVE	3120	013091580	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
B38599-2	5	9	5

Characteristics Data of NSN 3120-01-309-1580, 3120013091580

MRC	Criteria	Characteristic
AGFF	FLANGE WIDTH	0.0590 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM
ADAR	BODY OUTSIDE DIAMETER	0.4675 INCHES MINIMUM AND 0.4685 INCHES MAXIMUM
AEPR	FLANGE OUTSIDE DIAMETER	0.5590 INCHES MINIMUM AND 0.5650 INCHES MAXIMUM
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
ABHP	OVERALL LENGTH	0.1630 INCHES MINIMUM AND 0.1660 INCHES MAXIMUM
ADAS	BODY INSIDE DIAMETER	0.3438 INCHES MINIMUM AND 0.3443 INCHES MAXIMUM
BZLX	CORNER SHAPE	SQUARE ALL CORNERS
MATT	MATERIAL	STEEL COMP 304 OVERALL
STYL	STYLE DESIGNATOR	SOLID,EXTERNAL FLANGE ONE END