JE4129-41 Part by Juniper Elbow Co Inc with NSN 5310-01-500-7341 - Request a Quote Now

Part Number: JE4129-41

Manufacturer: juniper elbow co inc

NSN: 5310-01-500-7341

CAGE Code: 97537

NIIN: 015007341

Item Name : nut plain hexagon

INC Code: 01857

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5310 Nuts and Washers

For competitive procurement options on part number JE4129-41 from Juniper Elbow Co Inc (CAGE Code 97537), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number JE4129-41 Details:

Part number JE4129-41 is manufactured by Juniper Elbow Co Inc and listed with the item name Nut Plain Hexagon. Classified under NSN 5310-01-500-7341, the NIIN of this item is 015007341, its INC is 01857, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5310 Nuts and Washers. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for JE4129-41

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part JE4129-41 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number JE4129-41 with NSN 5310-01-500-7341, 5310015007341

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5310-01-500-7341 Item PartTypeName: NUT,PLAIN,HEXAGON	5310	015007341	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
JE129-41	5	9	5

Characteristics Data of NSN 5310-01-500-7341, 5310015007341

MRC	Criteria	Characteristic
AAJF	THREAD DIRECTION	RIGHT-HAND
ADEA	NUT HEIGHT	0.535 INCHES MINIMUM AND 0.559 INCHES MAXIMUM
ASDB	WIDTH ACROSS FLATS	0.922 INCHES MINIMUM AND 0.938 INCHES MAXIMUM
CQJX	NOMINAL THREAD SIZE	0.625 INCHES
MATT	MATERIAL	STEEL COMP 304 OVERALL
CRTM	BEARING SURFACE TYPE	CHAMFERED OR WASHER FACED
FEAT	SPECIAL FEATURES	NUT CAN BE EITHER FORGED OR MACHINED
CMLP	THREAD QUANTITY PER INCH	11
BZRR	THREAD SERIES	UNC
CQFM	HARDNESS RATING	NOT RATED
AZKQ	TEMP RATING	NOT RATED
ACTA	NUT STYLE	HEXAGON
AGAV	END ITEM IDENTIFICATION	HATCH, WT