AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number KDP328-12-066C from Kamatics Corporation (CAGE Code 50632), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number KDP328-12-066C Details:
Part number KDP328-12-066C is manufactured by Kamatics Corporation and listed with the item name Bearing Sleeve. Classified under NSN 3120-01-333-9997, the NIIN of this item is 013339997, its INC is 13205, and its NCB code is 01 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3120 Bearings Plain Unmounted. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3120-01-333-9997 Item PartTypeName: BEARING,SLEEVE | 3120 | 013339997 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 04A061-12-066C | 5 | 2 | 1 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 0.7220 INCHES NOMINAL |
| AGFF | FLANGE WIDTH | 0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM |
| BZLX | CORNER SHAPE | SQUARE OUTSIDE RIGHT CORNER |
| BZLX | CORNER SHAPE | UNDERCUT LEFT FLANGE OUTSIDE RIGHT CORNER |
| CQFM | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM LEFT END SURFACE OF BODY AND FLANGE |
| CQFM | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM OUTSIDE DIAMETER SURFACE OF BODY |
| CQFM | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM OUTSIDE DIAMETER SURFACE OF FLANGE |
| CQFM | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM RIGHT END SURFACE OF LEFT FLANGE |
| MATT | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE AND PLASTIC POLYAMIDE AND PLASTIC PHENOLIC INSIDE DIAMETER SURFACE OF BODY |
| MATT | MATERIAL | STEEL COMP 630 LARGEST OUTSIDE DIAMETER |
| MATT | MATERIAL | STEEL COMP 630 LEFT END SURFACE OF BODY AND FLANGE |
| MATT | MATERIAL | STEEL COMP 630 OUTSIDE DIAMETER SURFACE OF BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE LEFT END SURFACE OF BODY AND FLANGE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTSIDE DIAMETER SURFACE OF BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-81934 MIL SPEC SINGLE MATERIAL RESPONSE INSIDE DIAMETER SURFACE OF BODY |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE OUTSIDE DIAMETER SURFACE OF BODY |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE OUTSIDE DIAMETER SURFACE OF FLANGE |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE RIGHT END SURFACE OF BODY |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE RIGHT END SURFACE OF LEFT FLANGE |
| ADAR | BODY OUTSIDE DIAMETER | 0.9388 INCHES MINIMUM AND 0.9394 INCHES MAXIMUM |
| AEPR | FLANGE OUTSIDE DIAMETER | 1.1600 INCHES MINIMUM AND 1.1800 INCHES MAXIMUM |
| BZLX | CORNER SHAPE | SQUARE INSIDE LEFT CORNER |
| BZLX | CORNER SHAPE | SQUARE OUTSIDE LEFT CORNER |
| MATT | MATERIAL | STEEL COMP 630 RIGHT END SURFACE OF BODY |
| MATT | MATERIAL | STEEL COMP 630 RIGHT END SURFACE OF LEFT FLANGE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RIGHT END SURFACE OF BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RIGHT END SURFACE OF LEFT FLANGE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF BODY |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF BODY |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF LEFT FLANGE |
| BZLX | CORNER SHAPE | CHAMFERED INSIDE RIGHT CORNER |
| CQFM | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM RIGHT END SURFACE OF BODY |
| ZZZK | SPECIFICATION/STANDARD DATA | 80632-04A061 MANUFACTURERS STANDARD |
| ADAS | BODY INSIDE DIAMETER | 0.7390 INCHES MINIMUM AND 0.7410 INCHES MAXIMUM |
| STYL | STYLE DESIGNATOR | SOLID,EXTERNAL FLANGE ONE END |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
