KPD329-16-034C Part by Kamatics Corporation with NSN 3120-01-347-9205 - Request a Quote Now

Part Number: KPD329-16-034C

Manufacturer: kamatics corporation

NSN: 3120-01-347-9205

CAGE Code: 50632

NIIN: 013479205

Item Name : bushing sleeve

INC Code: 13206

Country: USA

NCB Code: 01

FSG: 31 Bearings

FSC: 3120 Bearings Plain Unmounted

For competitive procurement options on part number KPD329-16-034C from Kamatics Corporation (CAGE Code 50632), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number KPD329-16-034C Details:

Part number KPD329-16-034C is manufactured by Kamatics Corporation and listed with the item name Bushing Sleeve. Classified under NSN 3120-01-347-9205, the NIIN of this item is 013479205, its INC is 13206, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3120 Bearings Plain Unmounted. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for KPD329-16-034C

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part KPD329-16-034C with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number KPD329-16-034C with NSN 3120-01-347-9205, 3120013479205

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3120-01-347-9205 Item PartTypeName: BUSHING,SLEEVE	3120	013479205	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
5907421	5	2	1

Characteristics Data of NSN 3120-01-347-9205, 3120013479205

MRC	Criteria	Characteristic
ADAR	BODY OUTSIDE DIAMETER	1.1893 INCHES MINIMUM AND 1.1899 INCHES MAXIMUM
ADAS	BODY INSIDE DIAMETER	0.9890 INCHES MINIMUM AND 0.9910 INCHES MAXIMUM
AEPR	FLANGE OUTSIDE DIAMETER	1.4100 INCHES MINIMUM AND 1.4300 INCHES MAXIMUM
BZLX	CORNER SHAPE	CHAMFERED INSIDE RIGHT CORNER
BZLX	CORNER SHAPE	SQUARE INSIDE LEFT CORNER
MATT	MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE AND PLASTIC POLYAMIDE AND PLASTIC PHENOLIC INSIDE DIAMETER SURFACE OF BODY
MATT	MATERIAL	STEEL COMP 630 OUTSIDE DIAMETER SURFACE OF BODY
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTSIDE DIAMETER SURFACE OF BODY
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RIGHT END SURFACE OF LEFT FLANGE
SFTT	SURFACE TREATMENT	CADMIUM AND CHROMATE OUTSIDE DIAMETER SURFACE OF FLANGE
SFTT	SURFACE TREATMENT	CADMIUM AND CHROMATE RIGHT END SURFACE OF LEFT FLANGE
MATT	MATERIAL	STEEL COMP 630 OUTSIDE DIAMETER SURFACE OF FLANGE
MATT	MATERIAL	STEEL COMP 630 RIGHT END SURFACE OF BODY
MATT	MATERIAL	STEEL COMP 630 RIGHT END SURFACE OF LEFT FLANGE
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-B-81934 MIL SPEC SINGLE MATERIAL RESPONSE LEFT END SURFACE OF BODY AND FLANGE
ABHP	OVERALL LENGTH	0.3970 INCHES NOMINAL
AGFF	FLANGE WIDTH	0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM
BZLX	CORNER SHAPE	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
BZLX	CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
BZLX	CORNER SHAPE	UNDERCUT LEFT FLANGE BODY CORNER
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-B-81934 MIL SPEC SINGLE MATERIAL RESPONSE INSIDE DIAMETER SURFACE OF BODY
SFTT	SURFACE TREATMENT	CADMIUM AND CHROMATE OUTSIDE DIAMETER SURFACE OF BODY
BZLX	CORNER SHAPE	SQUARE OUTSIDE RIGHT CORNER
MATT	MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE AND PLASTIC POLYAMIDE AND PLASTIC PHENOLIC LEFT END SURFACE OF BODY AND FLANGE
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RIGHT END SURFACE OF BODY
STYL	STYLE DESIGNATOR	SOLID,EXTERNAL FLANGE ONE END