BW-11 Part by Keltek Specialty Tool Design & Manufacture, Inc with NSN 5110-00-595-8229 - Request a Quote Now

Part Number: BW-11

Manufacturer: keltek specialty tool design & manufacture, inc

NSN: 5110-00-595-8229

CAGE Code: 40496

NIIN: 005958229

Item Name : cutter wire rope hand operated

INC Code: 19184

Country: USA

NCB Code: 00

FSG: 51 Hand Tools

FSC: 5110 Hand Tools Edged Nonpowered

For competitive procurement options on part number BW-11 from Keltek Specialty Tool Design & Manufacture, Inc (CAGE Code 40496), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number BW-11 Details:

Part number BW-11 is manufactured by Keltek Specialty Tool Design & Manufacture, Inc and listed with the item name Cutter Wire Rope Hand Operated. Classified under NSN 5110-00-595-8229, the NIIN of this item is 005958229, its INC is 19184, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 51 Hand Tools and Class (FSC) 5110 Hand Tools Edged Nonpowered. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for BW-11

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part BW-11 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 5110-00-595-8229, 5110005958229

MRC	Criteria	Characteristic
MRC	Decoded Requirement	Clear Text Reply
FEAT	Special Features	0.116 IN. MAX SOFT WIRE ROPE CAPACITY; DESIGENED FOR CUTTING ELECTRICALLY CHARGED BARBED WIRE; INSULATED HANDLES WITHSTAND HIGH VOLTAGES UP TO 14,000 VOLT RMS; CUTS WIRE, CABLE AND LIGHT CHAIN TO 3/16", SOFT AND MEDIUM HARD METALS TO 1/4" DIAMETER; CUTS CHAIN LINKS UP TO BRINELL 300, OR ROCKWELL C31; A CENTER-CUT TOOL WITH A SPECIAL PARROT-BREAK JAW FOR EASE IN GRASPING WIRE AND STAPLES; OVERALL LENGTH: 9
AQGE	Cutter Type	COMPOUND LEVER, CENTER CUTTER