N4692A Part by Keysight Technologies Inc with NSN 6695-01-560-6107 - Request a Quote Now

Part Number: N4692A

Manufacturer: keysight technologies inc

NSN: 6695-01-560-6107

CAGE Code: KA563

NIIN: 015606107

Item Name : calibration set secondary transf

INC Code: 60157

Country: USA

NCB Code: 01

FSG: 66 Instruments and Laboratory Equipment

FSC: 6695 Combination And Miscellaneous Instruments

For competitive procurement options on part number N4692A from Keysight Technologies Inc (CAGE Code KA563), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number N4692A Details:

Part number N4692A is manufactured by Keysight Technologies Inc and listed with the item name Calibration Set Secondary Transf. Classified under NSN 6695-01-560-6107, the NIIN of this item is 015606107, its INC is 60157, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 66 Instruments and Laboratory Equipment and Class (FSC) 6695 Combination And Miscellaneous Instruments. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for N4692A

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part N4692A with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 6695-01-560-6107, 6695015606107

MRC	Criteria	Characteristic
MRC	Decoded Requirement	Clear Text Reply
FTLD	Functional Description	CALIBRATING NETWORK ANALYZERS
FEAT	Special Features	THE AGILENT PNA AND ENA SERIES OFNETWORK ANALYZERS CONTROLS THE MODULE DIRECTLY VIA THE USB INTERFACE; 10 MHZTO 40 GHZ FREQUENCY RANGE; USB INTERFACE FOR DIRECT CONTROL WITH PNA AND EN A SERIES OF NETWORK ANALYZERS; ALTERNATIVE 85097B INTERFACE WHEN USED WITH OTHER ANALYZERS; FULL TWO-PORT CALIBRATION WITH A SINGLE CONNECTION; REDUCED CONNECTOR WEAR; NIST TRACEABLE ACCURATE CALIBRATIONS; RELIABLE SOLID-STATE SWITCHING; WIDTH, 50.80 MM, LENGTH, 111.00 MM
CXCY	Part Name Assigned By Controlling Agency	N4692A 2-PORT MW ELECTRONIC CALIBRATION MODULE, 2.92 MM
MARK	Special Markings	CAUTION LABEL