TA9C18H17AC Part by Kirkhill Ta Co with NSN 5340-01-073-2798 - Request a Quote Now

Part Number: TA9C18H17AC

Manufacturer: kirkhill ta co

NSN: 5340-01-073-2798

CAGE Code: 84971

NIIN: 010732798

Item Name : clamp loop

INC Code: 17532

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5340 Hardware Commercial

For competitive procurement options on part number TA9C18H17AC from Kirkhill Ta Co (CAGE Code 84971), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number TA9C18H17AC Details:

Part number TA9C18H17AC is manufactured by Kirkhill Ta Co and listed with the item name Clamp Loop. Classified under NSN 5340-01-073-2798, the NIIN of this item is 010732798, its INC is 17532, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5340 Hardware Commercial. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for TA9C18H17AC

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part TA9C18H17AC with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 5340-01-073-2798, 5340010732798

MRC	Criteria	Characteristic
AAAL	TONGUE HOLE TYPE	ROUND, UNTHREADED
AAAP	CUSHIONING ENVIRONMENTAL PROTECTION	HEAT AND WEATHER RESISTANT
ABMK	OVERALL WIDTH	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM
ABMZ	DIAMETER	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM
ABPX	MATERIAL THICKNESS	0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM
AZCY	CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.972 INCHES MINIMUM AND 1.032 INCHES MAXIMUM
AZDC	DISTANCE FROM LOOP CENTER TO TONGUE END	1.220 INCHES NOMINAL
BZTN	LOOP INSIDE DIAMETER	1.062 INCHES NOMINAL
MATT	MATERIAL	ASBESTOS CUSHION
MATT	MATERIAL	STEEL COMP 321 BAND OR STEEL COMP 347 BAND
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 3840 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5510 ASSN STD 1ST MATERIAL RESPONSE BAND OR AMS 5512 ASSN STD 2ND MATERIAL RESPONSE BAND
STYL	STYLE DESIGNATOR	OFFSET MOUNT
ZZZK	SPECIFICATION/STANDARD DATA	81205-BACC10EP MANUFACTURERS SPECIFICATION