53443 Part by Klein Tools Inc with NSN 5133-00-188-7818 - Request a Quote Now

Part Number: 53443

Manufacturer: klein tools inc

NSN: 5133-00-188-7818

CAGE Code: 75347

NIIN: 001887818

Item Name : bit auger

Country: USA

NCB Code: 00

FSG: 51 Hand Tools

FSC: 5133 Drill Bits Counterbores and Countersinks Hand and Machine

For competitive procurement options on part number 53443 from Klein Tools Inc (CAGE Code 75347), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 53443 Details:

Part number 53443 is manufactured by Klein Tools Inc and listed with the item name Bit Auger. Classified under NSN 5133-00-188-7818, the NIIN of this item is 001887818, its INC is , and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 51 Hand Tools and Class (FSC) 5133 Drill Bits Counterbores and Countersinks Hand and Machine. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 53443

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 53443 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 5133-00-188-7818, 5133001887818

MRC	Criteria	Characteristic
MRC	Decoded Requirement	Clear Text Reply
ALAJ	Shank Square Width	0.625 INCHES NOMINAL
MATT	Material	STEEL OVERALL
ABHP	Overall Length	18.000 INCHES NOMINAL
AKZL	Nominal Cutting Diameter	1.1250 INCHES
CQFM	Hardness Rating	40.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
ZZZT	Nondefinitive Spec/Std Data	N CLASS AND 1 TYPE
AKZH	Cutting End Style	HOLLOW CENTER SINGLE TWIST W/SCREW POINT
AAZF	Shank Style	STRAIGHT SQUARE TANG
AKZY	Twist Length	12.000 INCHES MINIMUM