21D5C8C Part by Lockheed Martin Corporation with NSN 5310-01-237-9392 - Request a Quote Now

Part Number: 21D5C8C

Manufacturer: lockheed martin corporation

NSN: 5310-01-237-9392

CAGE Code: 04236

NIIN: 012379392

Item Name : washer recessed

INC Code: 15933

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5310 Nuts and Washers

For competitive procurement options on part number 21D5C8C from Lockheed Martin Corporation (CAGE Code 04236), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 21D5C8C Details:

Part number 21D5C8C is manufactured by Lockheed Martin Corporation and listed with the item name Washer Recessed. Classified under NSN 5310-01-237-9392, the NIIN of this item is 012379392, its INC is 15933, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5310 Nuts and Washers. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 21D5C8C

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 21D5C8C with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 21D5C8C with NSN 5310-01-237-9392, 5310012379392

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5310-01-237-9392 Item PartTypeName: WASHER,RECESSED	5310	012379392		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
21D5C8C	5	2	7

Characteristics Data of NSN 5310-01-237-9392, 5310012379392

MRC	Criteria	Characteristic
AAUB	HOLE DIAMETER	0.504 INCHES MINIMUM AND 0.515 INCHES MAXIMUM
ABKV	OUTSIDE DIAMETER	0.875 INCHES NOMINAL
ABMD	RECESS DIAMETER	0.604 INCHES MINIMUM AND 0.620 INCHES MAXIMUM
ABPX	MATERIAL THICKNESS	0.062 INCHES NOMINAL
CQBC	MINIMUM TENSILE STRENGTH	140000 POUNDS PER SQUARE INCH
CSTM	RECESS ANGLE	90.0 DEGREES NOMINAL
MATT	MATERIAL	IRON ALLOY 660 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL
STYL	STYLE DESIGNATOR	RECESSED