8143PC7 Part by Mark Controls Corp with NSN 5330-00-628-7809 - Request a Quote Now

Part Number: 8143PC7

Manufacturer: mark controls corp

NSN: 5330-00-628-7809

CAGE Code: 85578

NIIN: 006287809

Item Name : packing preformed

INC Code: 04521

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

FSC: 5330 Packing and Gasket Materials

For competitive procurement options on part number 8143PC7 from Mark Controls Corp (CAGE Code 85578), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 8143PC7 Details:

Part number 8143PC7 is manufactured by Mark Controls Corp and listed with the item name Packing Preformed. Classified under NSN 5330-00-628-7809, the NIIN of this item is 006287809, its INC is 04521, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5330 Packing and Gasket Materials. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 8143PC7

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 8143PC7 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 8143PC7 with NSN 5330-00-628-7809, 5330006287809

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5330-00-628-7809 Item PartTypeName: PACKING,PREFORMED	5330	006287809	Q	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
11-113	2	1	5

Characteristics Data of NSN 5330-00-628-7809, 5330006287809

MRC	Criteria	Characteristic
ABJH	TEMP RATING	-30.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT
ADVN	CROSS-SECTIONAL HEIGHT	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM
ADYT	CENTER HOLE DIAMETER	0.542 INCHES MINIMUM AND 0.556 INCHES MAXIMUM
ADYU	PERIPHERAL DIAMETER	0.742 INCHES MINIMUM AND 0.768 INCHES MAXIMUM
ANYN	ELONGATION PERCENTAGE	331 MAXIMUM
CQFM	HARDNESS RATING	70.0 SHORE DUROMETER A NOMINAL OVERALL
CRTL	CRITICALITY CODE JUSTIFICATION	ZZZY
MATT	MATERIAL	RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
ZZZY	REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS	MATERIAL WILL BE IN ACCORDANCE WITH NAVICP MECH; ACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS.