K98R0002-1 Part by Mcdonnell Douglas Corp with NSN 5365-01-348-8283 - Request a Quote Now

Part Number: K98R0002-1

Manufacturer: mcdonnell douglas corp

NSN: 5365-01-348-8283

CAGE Code: 12464

NIIN: 013488283

Item Name : spacer sleeve

INC Code: 13207

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5365 Bushings Rings Shims and Spacers

For competitive procurement options on part number K98R0002-1 from Mcdonnell Douglas Corp (CAGE Code 12464), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number K98R0002-1 Details:

Part number K98R0002-1 is manufactured by Mcdonnell Douglas Corp and listed with the item name Spacer Sleeve. Classified under NSN 5365-01-348-8283, the NIIN of this item is 013488283, its INC is 13207, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5365 Bushings Rings Shims and Spacers. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for K98R0002-1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part K98R0002-1 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number K98R0002-1 with NSN 5365-01-348-8283, 5365013488283

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5365-01-348-8283 Item PartTypeName: SPACER,SLEEVE	5365	013488283	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
2632-17562-PH115	5	2	3

Characteristics Data of NSN 5365-01-348-8283, 5365013488283

MRC	Criteria	Characteristic
ADAR	BODY OUTSIDE DIAMETER	0.1650 INCHES MINIMUM AND 0.1750 INCHES MAXIMUM
AGFF	FLANGE WIDTH	0.0260 INCHES MINIMUM AND 0.0360 INCHES MAXIMUM
BZLX	CORNER SHAPE	SQUARE ALL CORNERS
MATT	MATERIAL	PLASTIC PHENOLIC AND PAPER INTERMEDIATE LAYER
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	LL-P-513 FED SPEC SINGLE MATERIAL RESPONSE INTERMEDIATE LAYER
AEPR	FLANGE OUTSIDE DIAMETER	0.2660 INCHES MINIMUM AND 0.2960 INCHES MAXIMUM
ABHP	OVERALL LENGTH	0.0850 INCHES MINIMUM AND 0.1010 INCHES MAXIMUM
ADAS	BODY INSIDE DIAMETER	0.1150 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM
STYL	STYLE DESIGNATOR	SOLID,EXTERNAL FLANGE ONE END