AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number HS5445-3 from Mcdonnell Douglas Helicopter Co Inc (CAGE Code 02731), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number HS5445-3 Details:
Part number HS5445-3 is manufactured by Mcdonnell Douglas Helicopter Co Inc and listed with the item name Bearing Sleeve. Classified under NSN 3120-01-287-5831, the NIIN of this item is 012875831, its INC is 13205, and its NCB code is 01 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3120 Bearings Plain Unmounted. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3120-01-287-5831 Item PartTypeName: BEARING,SLEEVE | 3120 | 012875831 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HS5445-3 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADAR | BODY OUTSIDE DIAMETER | 0.8914 INCHES MINIMUM AND 0.8924 INCHES MAXIMUM |
| AGFF | FLANGE WIDTH | 0.0890 INCHES MINIMUM AND 0.0940 INCHES MAXIMUM |
| BZLX | CORNER SHAPE | SQUARE INSIDE LEFT CORNER |
| BZLX | CORNER SHAPE | SQUARE INSIDE RIGHT CORNER |
| BZLX | CORNER SHAPE | SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER |
| BZLX | CORNER SHAPE | SQUARE OUTSIDE LEFT CORNER |
| BZLX | CORNER SHAPE | SQUARE OUTSIDE RIGHT CORNER |
| BZLX | CORNER SHAPE | UNDERCUT LEFT FLANGE BODY CORNER |
| CQFM | HARDNESS RATING | 27.0 ROCKWELL C NOMINAL LEFT END SURFACE OF BODY AND FLANGE |
| CQFM | HARDNESS RATING | 27.0 ROCKWELL C NOMINAL OUTSIDE DIAMETER SURFACE OF BODY |
| CQFM | HARDNESS RATING | 27.0 ROCKWELL C NOMINAL OUTSIDE DIAMETER SURFACE OF FLANGE |
| CQFM | HARDNESS RATING | 27.0 ROCKWELL C NOMINAL RIGHT END SURFACE OF BODY |
| CQFM | HARDNESS RATING | 27.0 ROCKWELL C NOMINAL RIGHT END SURFACE OF LEFT FLANGE |
| FEAT | SPECIAL FEATURES | MAGNETIC PARTICLE INSPECTION PER HP6-5,CAGEC 02731 |
| MATT | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE OR PLASTIC POLYAMIDE OR PLASTIC PHENOLIC INSIDE DIAMETER SURFACE OF BODY |
| MATT | MATERIAL | STEEL COMP 630 LEFT END SURFACE OF BODY AND FLANGE |
| MATT | MATERIAL | STEEL COMP 630 OUTSIDE DIAMETER SURFACE OF BODY |
| MATT | MATERIAL | STEEL COMP 630 OUTSIDE DIAMETER SURFACE OF FLANGE |
| MATT | MATERIAL | STEEL COMP 630 RIGHT END SURFACE OF BODY |
| MATT | MATERIAL | STEEL COMP 630 RIGHT END SURFACE OF LEFT FLANGE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5643 ASSN STD SINGLE MATERIAL RESPONSE LEFT END SURFACE OF BODY AND FLANGE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5643 ASSN STD SINGLE MATERIAL RESPONSE OUTSIDE DIAMETER SURFACE OF BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5643 ASSN STD SINGLE MATERIAL RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5643 ASSN STD SINGLE MATERIAL RESPONSE RIGHT END SURFACE OF BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5643 ASSN STD SINGLE MATERIAL RESPONSE RIGHT END SURFACE OF LEFT FLANGE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-81820 MIL SPEC ALL MATERIAL RESPONSES INSIDE DIAMETER SURFACE OF BODY |
| SFTT | SURFACE TREATMENT | PASSIVATE LEFT END SURFACE OF BODY AND FLANGE |
| SFTT | SURFACE TREATMENT | PASSIVATE OUTSIDE DIAMETER SURFACE OF BODY |
| SFTT | SURFACE TREATMENT | PASSIVATE OUTSIDE DIAMETER SURFACE OF FLANGE |
| SFTT | SURFACE TREATMENT | PASSIVATE RIGHT END SURFACE OF BODY |
| SFTT | SURFACE TREATMENT | PASSIVATE RIGHT END SURFACE OF LEFT FLANGE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE LEFT END SURFACE OF BODY AND FLANGE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF BODY |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF BODY |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF LEFT FLANGE |
| STYL | STYLE DESIGNATOR | SOLID,EXTERNAL FLANGE ONE END |
| ZZZK | SPECIFICATION/STANDARD DATA | 02731-HS5445 MANUFACTURERS STANDARD |
| ABHP | OVERALL LENGTH | 0.4030 INCHES NOMINAL |
| ADAS | BODY INSIDE DIAMETER | 0.6885 INCHES MINIMUM AND 0.6890 INCHES MAXIMUM |
| AEPR | FLANGE OUTSIDE DIAMETER | 1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
