CFH-1 1 8-SB-C-1 Part by Mcgill Manufacturing Company Inc with NSN 3110-01-222-9164 - Request a Quote Now

Part Number: CFH-1 1 8-SB-C-1

Manufacturer: mcgill manufacturing company inc

NSN: 3110-01-222-9164

CAGE Code: 92563

NIIN: 012229164

Item Name : cam follower needle bearing

INC Code: 00040

Country: USA

NCB Code: 01

FSG: 31 Bearings

FSC: 3110 Bearings Antifriction Unmounted

For competitive procurement options on part number CFH-1 1 8-SB-C-1 from Mcgill Manufacturing Company Inc (CAGE Code 92563), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number CFH-1 1 8-SB-C-1 Details:

Part number CFH-1 1 8-SB-C-1 is manufactured by Mcgill Manufacturing Company Inc and listed with the item name Cam Follower Needle Bearing. Classified under NSN 3110-01-222-9164, the NIIN of this item is 012229164, its INC is 00040, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3110 Bearings Antifriction Unmounted. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for CFH-1 1 8-SB-C-1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part CFH-1 1 8-SB-C-1 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number CFH-1 1 8-SB-C-1 with NSN 3110-01-222-9164, 3110012229164

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-01-222-9164 Item PartTypeName: CAM FOLLOWER,NEEDLE BEARING	3110	012229164	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
CFH-1 1/8-SB-C-1	5	1	5

Characteristics Data of NSN 3110-01-222-9164, 3110012229164

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	2A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.6250 INCHES NOMINAL
ABHP	OVERALL LENGTH	1.4050 INCHES NOMINAL
ADGA	OVERALL OUTSIDE DIAMETER	1.1240 INCHES MINIMUM AND 1.1254 INCHES MAXIMUM
AGRJ	STUD DIAMETER	0.6250 INCHES MINIMUM AND 0.6264 INCHES MAXIMUM
AGVT	OUTER RING WIDTH	0.6200 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM
AGXF	STUD LENGTH	0.7500 INCHES NOMINAL
AGYJ	SEAL QUANTITY	2
AGYW	BEARING SEAL TYPE	CONTACT
AGZA	ALIGNMENT TYPE	RIGID
CBBL	FEATURES PROVIDED	LUBRICATION HOLE AND LUBRICATION GROOVE
CMLP	THREAD QUANTITY PER INCH	18
CQJX	NOMINAL THREAD SIZE	0.6250 INCHES
FEAT	SPECIAL FEATURES	HEX HOLE 0.1875 MIN
LBMA	LUBRICATION MATERIAL	GREASE
LMDC	LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATT	MATERIAL	PLASTIC POLYHEXAMETHYLENE ADIPAMIDE SEAL
MATT	MATERIAL	STEEL COMP 440C OUTER RING
MATT	MATERIAL	STEEL COMP 440C ROLLER
MATT	MATERIAL	STEEL COMP 440C WASHER
MATT	MATERIAL	STEEL COMP E52100 OR STEEL COMP 8620 STUD
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE ROLLER
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE WASHER
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6440 ASSN STD 1ST MATERIAL RESPONSE AND AMS 6274 ASSN STD 2ND MATERIAL RESPONSE STUD
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	L-P-410 FED SPEC SINGLE MATERIAL RESPONSE SEAL
SFTT	SURFACE TREATMENT	CHROMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	AMS 2406 ASSN STD SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES
STYL	STYLE DESIGNATOR	CAM FOLLOWER
THSD	THREAD SERIES DESIGNATOR	UNF