CCF-1 2-N-S Part by Mcgill Manufacturing Company Inc with NSN 3110-01-298-7791 - Request a Quote Now

Part Number: CCF-1 2-N-S

Manufacturer: mcgill manufacturing company inc

NSN: 3110-01-298-7791

CAGE Code: 92563

NIIN: 012987791

Item Name : cam follower needle bearing

INC Code: 00040

Country: USA

NCB Code: 01

FSG: 31 Bearings

FSC: 3110 Bearings Antifriction Unmounted

For competitive procurement options on part number CCF-1 2-N-S from Mcgill Manufacturing Company Inc (CAGE Code 92563), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number CCF-1 2-N-S Details:

Part number CCF-1 2-N-S is manufactured by Mcgill Manufacturing Company Inc and listed with the item name Cam Follower Needle Bearing. Classified under NSN 3110-01-298-7791, the NIIN of this item is 012987791, its INC is 00040, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3110 Bearings Antifriction Unmounted. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for CCF-1 2-N-S

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part CCF-1 2-N-S with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number CCF-1 2-N-S with NSN 3110-01-298-7791, 3110012987791

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-01-298-7791 Item PartTypeName: CAM FOLLOWER,NEEDLE BEARING	3110	012987791	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
CCF-1/2-N-S	5	2	3

Characteristics Data of NSN 3110-01-298-7791, 3110012987791

MRC	Criteria	Characteristic
AASA	THREAD LENGTH	0.2500 INCHES NOMINAL
ABHP	OVERALL LENGTH	0.8800 INCHES NOMINAL
AGXF	STUD LENGTH	0.5000 INCHES NOMINAL
FEAT	SPECIAL FEATURES	OD CROWNED ON A 30 IN. RADIUS; MEANS FOR RELUBRICATION
AAJD	THREAD CLASS	2A
AGVT	OUTER RING WIDTH	0.3390 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM
AGYJ	SEAL QUANTITY	2
AGYW	BEARING SEAL TYPE	CONTACT
CQJX	NOMINAL THREAD SIZE	0.1250 INCHES
MATT	MATERIAL	PLASTIC POLYAMIDE SEAL
MATT	MATERIAL	STEEL INNER RING
STYL	STYLE DESIGNATOR	CAM FOLLOWER
AAJF	THREAD DIRECTION	RIGHT-HAND
AGRJ	STUD DIAMETER	0.1900 INCHES MINIMUM AND 0.1910 INCHES MAXIMUM
MATT	MATERIAL	STEEL OUTER RING
MATT	MATERIAL	STEEL ROLLER
THSD	THREAD SERIES DESIGNATOR	UNF
ADGA	OVERALL OUTSIDE DIAMETER	0.5000 INCHES NOMINAL
CMLP	THREAD QUANTITY PER INCH	32
MATT	MATERIAL	STEEL END PLATE
SFTT	SURFACE TREATMENT	OXIDE ALL EXTERNAL/EXPOSED METAL SURFACES