AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number D-983-88-00C36 from Mile Marker Inc (CAGE Code 0GZB7), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number D-983-88-00C36 Details:
Part number D-983-88-00C36 is manufactured by Mile Marker Inc and listed with the item name Hose Assembly Nonmetallic. Classified under NSN 4720-01-475-3757, the NIIN of this item is 014753757, its INC is 20311, and its NCB code is 01 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 47 Pipe Tubing Hose and Fittings and Class (FSC) 4720 Hose and Tubing Flexible. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-475-3757 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 014753757 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 4720PL0840204 | 2 | 9 | 6 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CQBD | Burst Test Pressure | 9000.0 POUNDS PER SQUARE INCH |
| AARX | Inside Diameter | 0.312 INCHES NOMINAL |
| CQQR | Thread Pitch In Millimeters | 1.5000 2ND END |
| ABKV | Outside Diameter | 0.695 INCHES NOMINAL |
| AAJF | Thread Direction | RIGHT-HAND 2ND END |
| ACKH | Minimum Inside Bending Radius | 4.000 INCHES |
| CQRB | Seat Angle | 37.0 DEGREES 1ST END |
| CTTC | Thread Tolerance Class | 6G EXTERNAL 2ND END |
| CRWL | Inside Surface Condition | SMOOTH |
| FEAT | Special Features | EXTERNAL PROTECTION TYPE AND LOCATION- OVERALL CHAFE GUARD, PLASTIC COIL , INNER CONVEYING TUBE MATERIAL-RUBBER, BUNA-N; OUTER COVERING CONVOLUTED NYLON TUBING PN 01276-FC425-16; NSN FOR REPLACEMENT HOSE 4720-00-717-1621, PN 01276-FC300-06; NSN FOR STRAIG |
| AAJD | Thread Class | 2B 1ST END |
| AAJF | Thread Direction | RIGHT-HAND 1ST END |
| CQGM | Maximum Operating Pressure | 2250.0 POUNDS PER SQUARE INCH |
| AGAV | End Item Identification | 2320-01-371-9583 |
| AKUU | End Connection Design | ELBOW 2ND END |
| THSD | Thread Series Designator | ISO M 2ND END |
| AKUU | End Connection Design | STRAIGHT 1ST END |
| CRDW | Hydrostatic Test Pressure | 4500.0 POUNDS PER SQUARE INCH |
| CBBL | Features Provided | REUSABLE END FITTINGS |
| AKXL | End Fitting Component And Material | COMPLETE FITTING STEEL ALL ENDS |
| CRFY | Flow Angle | 45.0 DEGREES 2ND END |
| AKXM | Fitting Component And Surface Treatment | COMPLETE FITTING ZINC 1ST END |
| CXCY | Part Name Assigned By Controlling Agency | HYDRAULIC WINCH LINE |
| THSD | Thread Series Designator | UNF 1ST END |
| AWLS | Connection Type | THREADED EXTERNAL TUBE 2ND END |
| MEDA | Media For Which Designed | FUEL/OIL, HYDROCARBON AND HYDRAULIC FLUID SINGLE RESPONSE |
| AAGR | Cross-Sectional Shape Style | ROUND |
| CRJM | Outer Covering Environmental Protection | ABRASION RESISTANT |
| MRC | Decoded Requirement | Clear Text Reply |
| CRXX | Measuring Method And Length | 36.000 INCHES NOMINAL EXCLUDING END FITTINGS |
| CQJX | Nominal Thread Size | 0.562 INCHES 1ST END |
| AWLS | Connection Type | THREADED INTERNAL TUBE 1ST END |
| AHNC | Connection Style | SWIVEL NUT FLARE 1ST END |
| CQRB | Seat Angle | 37.0 DEGREES 2ND END |
| AHNC | Connection Style | SWIVEL NUT, INVERTED FLARE 2ND END |
| CQCS | Layer Composition And Location | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| ABJH | Temp Rating | -40.0 DEG FAHRENHEIT AND 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ZZZK | Specification/Standard Data | SAE J517, 100R5 NATIONAL STD/SPEC |
| CQJX | Nominal Thread Size | 18.0 MILLIMETERS 2ND END |
| CQCS | Layer Composition And Location | 2ND LAYER BRAIDED COTTON CORD |
| CQCS | Layer Composition And Location | OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD |
| CQCS | Layer Composition And Location | 3RD LAYER BRAIDED COTTON CORD |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
