EGP8C30KL10 Part by Monogram Aerospace Fasteners Inc with NSN 5315-01-096-0204 - Request a Quote Now

Part Number: EGP8C30KL10

Manufacturer: monogram aerospace fasteners inc

NSN: 5315-01-096-0204

CAGE Code: 98524

NIIN: 010960204

Item Name : pin quick release

INC Code: 08323

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5315 Nails Machine Keys and Pins

For competitive procurement options on part number EGP8C30KL10 from Monogram Aerospace Fasteners Inc (CAGE Code 98524), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number EGP8C30KL10 Details:

Part number EGP8C30KL10 is manufactured by Monogram Aerospace Fasteners Inc and listed with the item name Pin Quick Release. Classified under NSN 5315-01-096-0204, the NIIN of this item is 010960204, its INC is 08323, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5315 Nails Machine Keys and Pins. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for EGP8C30KL10

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part EGP8C30KL10 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number EGP8C30KL10 with NSN 5315-01-096-0204, 5315010960204

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5315-01-096-0204 Item PartTypeName: PIN,QUICK RELEASE	5315	010960204	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
482625-7	5	2	5

Characteristics Data of NSN 5315-01-096-0204, 5315010960204

MRC	Criteria	Characteristic
AASL	HEAD DIAMETER	0.375 INCHES NOMINAL
AAZE	SHANK DIAMETER	0.500 INCHES NOMINAL
ABRM	DETENT QUANTITY	2
ACHS	LANYARD LENGTH	10.000 INCHES NOMINAL
AFLW	ACTUATION METHOD	LEVER
ANEE	GRIP LENGTH	1.875 INCHES NOMINAL
APCM	ACTUATION TYPE	PUSH
CQSX	SHEAR STRENGTH	180000 DOUBLE POUNDS PER SQUARE INCH
CRQD	SHOULDER TO HEAD END DISTANCE	1.375 INCHES NOMINAL
CSSB	PIN CENTER TO HANDLE END DISTANCE	5.000 INCHES NOMINAL
CTDJ	PIN ATTACHMENT TYPE	CABLE LANYARD W/TERMINATIONS
CTXT	DETENT TO TAPERED END DISTANCE	0.500 INCHES NOMINAL
MATT	MATERIAL	STEEL CORROSION RESISTING OVERALL
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL
STYL	STYLE DESIGNATOR	CAM LEVER